Superfluid epoxy resin for impregnation with MapeWrap "wet system". MapeWrap 21 is a two-component superfluid solvent-free product based on epoxy resins, especially formulated for the impregnation,…
Superfluid epoxy resin for impregnation with MapeWrap "wet system". MapeWrap 21…
Paintable, castable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.25 N/mm².…
Paintable, castable polyurethane sealant with a low modulus of elasticity for…
Two-component, aliphatic, transparent or coloured, matt polyurethane finish in water dispersion. TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix:…
Two-component, aliphatic, transparent or coloured, matt polyurethane finish in…
Two-component, aliphatic, transparent, matt polyurethane finish in water dispersion with no NMP for protecting resin systems. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 10 : 1. Colour of mix:…
Two-component, aliphatic, transparent, matt polyurethane finish in water…
Two-component, aliphatic, transparent, shiny polyurethane finish in water dispersion with no NMP for protecting resin systems. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 10 : 1. Colour of mix:…
Two-component, aliphatic, transparent, shiny polyurethane finish in water…
Water repellent/ hydrophobic waterproofing admixture for concrete. Dosage: from 0.2 to 0.6 kg every 100 kg of cement. Packaging: Idrocrete DM is available in 25 kg and 200 l drums, 1000 l tanks, and…
Water repellent/ hydrophobic waterproofing admixture for concrete. Dosage: from…
Two-component polyurethane elastomeric, thixotropic, liquid waterproofing membrane for sealing, filling, detailing Mapeproof AL NA and Mapethene HT/LT membranes
Class II structural polymer fibres, in compliance with EN 14889-2:2006, with a length of 50 mm respectively, developed to improve the performance characteristics of conventional concrete, pre-cast…
Class II structural polymer fibres, in compliance with EN 14889-2:2006, with a…
Virgin, mono-filament polypropylene fibres for mortar and concrete, available in diameters of 12 and 18 mm. TECHNICAL DATA: Dosage: 0.4-0.8 kg m ³ of concrete or mortar. Packaging: boxes of 30x0.6 kg…
Virgin, mono-filament polypropylene fibres for mortar and concrete, available…
Two-component ultra high performance shrinkage-compensated free-flowing high ductility fibre-reinforced cementitious mortar with stiff steel fibres for restoring and repairing concrete. N.B.:…
Two-component ultra high performance shrinkage-compensated free-flowing high…
Two-component multipurpose epoxy formulate for industrial floors in compliance with standards applied to the drinks and foodstuffs industry and clean rooms
Two-component multipurpose epoxy formulate for industrial floors in compliance…
Single-component, normal setting cementitious mortar for smoothing concrete surfaces. WHERE TO USE Protection, smoothing and levelling of concrete surface imperfections up to 2 mm in a single…
Single-component, normal setting cementitious mortar for smoothing concrete…
Two-component, solvent-free pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings for hydraulic works, roofs and bridge decks directly on site
Two-component, solvent-free pure polyurea membrane applied by spray with a…
Salt-resistant, transpirant lime and ECO-POZZOLAN scratch-coat mortar applied as a base layer for de-humidifying, transpirant and “structural” render. TECHNICAL DATA: Maximum diameter of aggregate:…
Salt-resistant, transpirant lime and ECO-POZZOLAN scratch-coat mortar applied…
