Superplasticizer admixture based on polymer modified polycarboxylate ether for high performance concrete mixes with very low water/cement ratios, high compressive strengths and long slump retention…
Superplasticizer admixture based on polymer modified polycarboxylate ether for…
Superplasticizing powder admixture for concrete. DOSAGE: For standard concrete production the dosage should be0.3-0.8 kg/100 kg of total cementitious materials. For high performance concrete the…
Superplasticizing powder admixture for concrete. DOSAGE: For standard concrete…
Single component cementitious mortar for bonding and smoothing o thermal insulating panels and insulation cladding systems TECHNICAL DATA: Consistency: powder. Colour: grey. Density of the mix: 1.45…
Single component cementitious mortar for bonding and smoothing o thermal…
High range water reducing superplasticizer for high strength concrete and concrete containing high proportions of GGBS and silica fume. TYPICAL DOSAGE: The optimum dosage of Mapefluid N270 to meet…
High range water reducing superplasticizer for high strength concrete and…
Retarding plasticizer water reducing admixture. TYPICAL DOSAGE: The optimum dosage of Mapeplast RP95 SA to meet specific job site requirement should be figured out by site trials using the selected…
Retarding plasticizer water reducing admixture. TYPICAL DOSAGE: The optimum…
Superplasticizing admixture for concrete. Mapefluid N110 is a chloride free superplasticizing admixture formulated from synthetic polymers. It complies with ASTM C494 as Type F and G and EN 934-2 as…
Superplasticizing admixture for concrete. Mapefluid N110 is a chloride free…
Superplasticizing admixture for concrete. Mapefluid N280 is a chloride free superplasticizing admixture formulated from synthetic polymers. It complies with ASTM C494 as Type F and G and EN 934-2 as…
Superplasticizing admixture for concrete. Mapefluid N280 is a chloride free…
Third generation superplasticizer based on modified acrylic polymer; developed specifically for ready mix concrete industries requiring the highest concrete quality and performance Typical Dosage:…
Third generation superplasticizer based on modified acrylic polymer; developed…
Hyperpasticising admixture based on a new generation of polycarboxylate ether for high performance concrete mixes with very long water cement ratios, high early compressive strengths, long slump…
Hyperpasticising admixture based on a new generation of polycarboxylate ether…
Film-forming curing compound in water emulsion for concrete. WHERE TO USE To protect fresh concrete from rapid water evaporation caused by wind or sunlight and to reduce surface cracking. CONSUMPTION…
Film-forming curing compound in water emulsion for concrete. WHERE TO USE To…
