Slow setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 12 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 12 is used…
Slow setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap…
Two-component, solvent-free, low-viscosity, epoxy primer with a very low emission level of volatile organic compounds for consolidating and waterproofing cementitious substrates. TECHNICAL DATA:…
Two-component, solvent-free, low-viscosity, epoxy primer with a very low…
Two-component, vapour-permeable, neutral-coloured epoxy formulate in water dispersion for industrial floors. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 1…
Two-component, vapour-permeable, neutral-coloured epoxy formulate in water…
Two-component, high-flexibility cementitious mortar (with crack-bridging 2 mm), applied by trowel or with a roller, for the waterproofing of balconies, basins, swimming pools and wet areas.…
Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…
Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…
Superfluid epoxy resin for impregnation with MapeWrap "wet system". MapeWrap 21 is a two-component superfluid solvent-free product based on epoxy resins, especially formulated for the impregnation,…
Superfluid epoxy resin for impregnation with MapeWrap "wet system". MapeWrap 21…
Paintable, castable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.25 N/mm².…
Paintable, castable polyurethane sealant with a low modulus of elasticity for…
Two-component, aliphatic, transparent or coloured, matt polyurethane finish in water dispersion. TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix:…
Two-component, aliphatic, transparent or coloured, matt polyurethane finish in…
Two-component, aliphatic, transparent, matt polyurethane finish in water dispersion with no NMP for protecting resin systems. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 10 : 1. Colour of mix:…
Two-component, aliphatic, transparent, matt polyurethane finish in water…
Two-component, aliphatic, transparent, shiny polyurethane finish in water dispersion with no NMP for protecting resin systems. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 10 : 1. Colour of mix:…
Two-component, aliphatic, transparent, shiny polyurethane finish in water…
Water repellent/ hydrophobic waterproofing admixture for concrete. Dosage: from 0.2 to 0.6 kg every 100 kg of cement. Packaging: Idrocrete DM is available in 25 kg and 200 l drums, 1000 l tanks, and…
Water repellent/ hydrophobic waterproofing admixture for concrete. Dosage: from…
Two-component polyurethane elastomeric, thixotropic, liquid waterproofing membrane for sealing, filling, detailing Mapeproof AL NA and Mapethene HT/LT membranes
Class II structural polymer fibres, in compliance with EN 14889-2:2006, with a length of 50 mm respectively, developed to improve the performance characteristics of conventional concrete, pre-cast…
Class II structural polymer fibres, in compliance with EN 14889-2:2006, with a…
Virgin, mono-filament polypropylene fibres for mortar and concrete, available in diameters of 12 and 18 mm. TECHNICAL DATA: Dosage: 0.4-0.8 kg m ³ of concrete or mortar. Packaging: boxes of 30x0.6 kg…
Virgin, mono-filament polypropylene fibres for mortar and concrete, available…
