ULTRATOP LOFT W

One-component fine-textured cementitious paste for creating decorative floor and wall coatings with a trowel or nuvolato-effect finish.

MATERIC AND NATURAL EFFECT

HIGHLY ATTRACTIVE FINISH

HIGH RESISTANCE TO WEAR AND ABRASION

EASY TO APPLY

ULTRATOP LOFT is made up of ULTRATOP LOFT F and ULTRATOP LOFT W and is a cementitious-based system for creating decorative floors and walls with a trowel or nuvolato-effect finish, characterised by a pronounced materic look and high resistance to abrasion, all contained within just a thin coat. ULTRATOP LOFT F is a trowel-applied, coarse-textured cementitious paste, unlike ULTRATOP LOFT W which contains finer aggregates and, as a result, has a smoother texture. The two products are normally used together when creating floor and wall coverings, depending on specific project requirements.

 

The system is recommended for both new floor and wall coverings and for restoring old coverings. It is suitable for use in all domestic and public settings in the interior design sector, including those exposed to intense pedestrian traffic, such as:

Bars, Shops, Apartments, Restaurants, Resort complexes, Luxury retreats, Hotels, Showrooms, Museums, Cafeterias, Wellness areas

To verify the feasibility of the work or the most suitable product request a consultation from our Technical Services Division

 

ULTRATOP LOFT W

One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

ADVANTAGES:

  • Materic and natural effect
  • High resistance to wear and abrasion
  • Highly attractive finish
  • Easy to apply
  • For rapid installation
  • Exposed-finish walls and floors

TECHNICAL DATA:
Consistency: fine powder.
Colour: white or natural.
Bulk density: 900 kg/m³.
Mixing ratio: approx. 32-35 parts of water per 100 parts by weight of ULTRATOP LOFT W.
Workability time: 20 minutes.
Setting time: 80 minutes.
Set to foot traffic: 3 hours.
Compressive strength at +23°C after 28 days: 25 N/mm².
Flexural strength at +23°C after 28 days: 12 N/mm².
Abrasion resistance - Taber abrasion meter (H22 disk, 500 g, 200 revs) after 28 days: 500 mg.
Abrasion resistance class (Böhme test) after 28 days: A9.
Application: smooth steel, Teflon or rubber trowel.
Consumption: 0.7-1 kg/m².
Packaging: 20 kg bags. Kits containing 4x5 kg alupacks.

Related documentation

Technical data sheet
Download

Last Projects ULTRATOP LOFT W

Keep in touch

Subscribe to our newsletter to get Mapei news