ULTRATOP LOFT is made up of ULTRATOP LOFT F and ULTRATOP LOFT W and is a cementitious-based system for creating decorative floors and walls with a trowel or nuvolato-effect finish, characterised by a pronounced materic look and high resistance to abrasion, all contained within just a thin coat. ULTRATOP LOFT F is a trowel-applied, coarse-textured cementitious paste, unlike ULTRATOP LOFT W which contains finer aggregates and, as a result, has a smoother texture. The two products are normally used together when creating floor and wall coverings, depending on specific project requirements.
The system is recommended for both new floor and wall coverings and for restoring old coverings. It is suitable for use in all domestic and public settings in the interior design sector, including those exposed to intense pedestrian traffic, such as:
Bars, Shops, Apartments, Restaurants, Resort complexes, Luxury retreats, Hotels, Showrooms, Museums, Cafeterias, Wellness areas
To verify the feasibility of the work or the most suitable product request a consultation from our Technical Services Division
One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
Colour: white or natural.
Bulk density: 1,100 kg/m³.
Mixing ratio: approx. 25-29 parts of water per 100 parts by weight of ULTRATOP LOFT F.
Workability time: 20 minutes.
Setting time: 80 minutes.
Set to foot traffic: 3 hours.
Compressive strength at +23°C after 28 days: 25 N/mm².
Flexural strength at +23°C after 28 days: 10 N/mm².
Abrasion resistance - Taber abrasion meter (H22 disk, 500 g, 200 revs) after 28 days: 500 mg.
Abrasion resistance class (Böhme test) after 28 days: A9.
Application: smooth steel, Teflon or rubber trowel.
Consumption: 0.7-1 kg/m².
Packaging: 20 kg bags. Kits containing 4x5 kg alupacks.