Project Bulgaria Hotel, Burgas


Yard	interior and exterior
Location	Burgas, Bulgaria
Subcategory	HOTEL/INN
Built in	2019
Opened in	2020
Application	floor leveling, structural strenghtening, facades renovation, ceramic installation
Start and finish date	2019/2020
Application Type	Facade interventions, Floor/wall covering, Tile & stone installation systems
Client	Hotel Bulgaria management
Contractor company	SMK Invictus
Installer companies	SMK Invictus, Skarlevi Engineering
Project Manager	Georgi Papazov

ADESILEX P7

High performance cementitious adhesive with no vertical slip for ceramic and porcelain tiles. WHERE TO USE Interior and exterior bonding of ceramic tiles, porcelain and mosaics on floors, walls and…

High performance cementitious adhesive with no vertical slip for ceramic and…

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has a very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

COLORITE PERFORMANCE

Acrylic resin-based paint in water dispersion for protecting and decorating external and internal surfaces. Colorite Performance is a paint for internal and external walls, made up of saponifiable,…

Acrylic resin-based paint in water dispersion for protecting and decorating…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. WHERE TO USE: • Monolithic construction joints between fresh and hardened concrete. • Bonding precast concrete…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MALECH

Micronized acrylic-based primer in water dispersion. Malech is used as a primer for wall surfaces in general (e.g. concrete or repairs with cement mortars) before applying a coloured finishing coat…

Micronized acrylic-based primer in water dispersion. Malech is used as a primer…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for up to 25% movements.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems. TECHNICAL DATA: Composition: 100% glass…

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when…

PLANISEAL 288

Two-component cementitious mortar for waterproofing structures below ground level and storage tanks. TECHNICAL DATA: Consistency: fluid; applicable by brush. Mixing ratio: comp. A : comp. B = 4 : 1.…

Two-component cementitious mortar for waterproofing structures below ground…

PLANISEAL 88

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approx. 1 h.…

Osmotic cementitious mortar suitable for contact with drinking water, for…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

QUARZOLITE TONACHINO

High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…

High-protection, thick-layered acrylic coating product with high filling…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…