Project Centrum Babylon, Liberec


Yard	Swimming-pools covering
Location	Liberec, Czech Republic
Subcategory	MULTIFUNCTIONAL CENTER
Built in	1998
Opened in	2000
Application	New swimming-pools coverings
Application Type	Floor/wall coverings
Contractor company	Sdruzeni Havax sro - Liberec
Installer companies	Kodet sro - Kladno
Architects	Union Arch. Liberec; Sportprojecta sro - Brno; Sportakcent sro - Praga

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

AQUAFLEX SYSTEM

Permanent encapsulation of asbestos cement. Use Aquaflex System cycle for the permanent encapsulation of type A (external view), B (internal view) and C (no view, before confinement) in compliance…

Permanent encapsulation of asbestos cement. Use Aquaflex System cycle for the…

Elastocolor Paint

Elastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Elastomeric, crack-bridging, permanently flexible, protective paint with high…

FUGOLASTIC

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is used as a substitute for water to mix Keracolor FF and GG cementitious grouts, to improve the grout compactness,…

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is…

GRANIRAPID

Two-component high performance fast-setting and hydrating cementitious adhesive for ceramic tiles and stone materials. WHERE TO USE For bonding all kinds of interior and exterior ceramic tiles;…

Two-component high performance fast-setting and hydrating cementitious adhesive…

ISOLASTIC

Latex additive to impart elasticity to cement based adhesive. Isolastic is a synthetic polymer to be mixed with Kerabond T or Adesilex P10 to improve their performances and deformability to meet the…

Latex additive to impart elasticity to cement based adhesive. Isolastic is a…

KERALASTIC

Two-component, high-performance polyurethane adhesive for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Set to light foot traffic: approx. 12 hours. Ready for use: approx.…

Two-component, high-performance polyurethane adhesive for ceramic tiles and…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

$LATEX PLUS$

LATEX PLUS

Latex admixture inducing elasticity to be mixed with Keraquick. Applications: Latex Plus is an admixture to be mixed with Keraquick. It improves deformability to meet the requirements of class S2…

Latex admixture inducing elasticity to be mixed with Keraquick. Applications:…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for up to 25% movements.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVOPLAN

Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…

Smoothing mortar for internal and external walls and ceilings for thicknesses…

NIVORAPID

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

Gel detergent for graffiti-damaged surfaces. WallGard Graffiti Remover Gel is recommended for all surfaces not previously treated with graffiti-repellent protection against conventional spray-paints.…

Gel detergent for graffiti-damaged surfaces. WallGard Graffiti Remover Gel is…