Project Corona Hotel, San Giovanni Rotondo


Yard	hotel restoration
Location	San Giovanni Rotondo, Italy
Subcategory	HOTEL/INN
Built in	2010
Opened in	2012
Application	global interior and exterior hotel restoration
Application Type	Facade interventions
Client	Co. Mant sas
Contractor company	La nUova Edilizia srl
Installer companies	La Nuova Edilizia srl
Specialists involved	ing. Pasquale Cafaro
MAPEI Distributor	Savino srl

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

CARBOPLATE

Pultruded carbon fibre plate with a protective plastic film on both faces

Elastocolor Paint

Elastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Elastomeric, crack-bridging, permanently flexible, protective paint with high…

ELASTOCOLOR WATERPROOF

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water. TECHNICAL DATA: Consistency: thick liquid. Colour: colours from the colour chart range…

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. WHERE TO USE: • Monolithic construction joints between fresh and hardened concrete. • Bonding precast concrete…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

FUGOLASTIC

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is used as a substitute for water to mix Keracolor FF and GG cementitious grouts, to improve the grout compactness,…

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

KERAFLEX MAXI S1

High-performance, deformable cementitious adhesive, with extended open time and no vertical slip, with very low emission level of volatile organic compounds. Especially suitable for the installation…

High-performance, deformable cementitious adhesive, with extended open time and…

MALECH

Micronized acrylic-based primer in water dispersion. Malech is used as a primer for wall surfaces in general (e.g. concrete or repairs with cement mortars) before applying a coloured finishing coat…

Micronized acrylic-based primer in water dispersion. Malech is used as a primer…

MAPE-ANTIQUE INTONACO NHL

Transpirant base render made from natural hydraulic lime and ECO-POZZOLAN, for application on existing masonry work, including those of historical interest, and on new constructions. TECHNICAL DATA:…

Transpirant base render made from natural hydraulic lime and ECO-POZZOLAN, for…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

Two-component transparent epoxy primer in water dispersion. TECHNICAL DATA: Consistency of mix: fluid. Colour of mix: opaline. Mixing ratio: comp. A: comp. B = 2.3 : 3.6. Workability time: 2-3 hours.…

Two-component transparent epoxy primer in water dispersion. TECHNICAL DATA:…

MAPEFLEX MS45

Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%.

Paintable hybrid sealant and adhesive with a high modulus of elasticity also…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…

MAPEWRAP C UNI-AX

High strength uni-directional continuous carbon fibre fabric with high and very high modulus of elasticity. MapeWrap C UNI-AX and MapeWrap C UNI-AX HM are uni-directional continuous carbon fibre…

High strength uni-directional continuous carbon fibre fabric with high and very…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…

NIVOPLAN

Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…

Smoothing mortar for internal and external walls and ceilings for thicknesses…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PLANITOP 200

Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm.…

Water-repellent cementitious skimming mortar with a fine-textured, natural…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

POROCOL

Cementitious-based adhesive mortar in powder form for breeze-block walls. Porocol is an off-white coloured powder made up of cement, fine graded sand, synthetic resins and special additives. When…

Cementitious-based adhesive mortar in powder form for breeze-block walls.…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

SILANCOLOR BASE COAT

Coloured silicon resin-based base paint in water dispersion for filling and evening out surfaces. Silancolor Base Coat is a coloured base product made from silicon resin in water dispersion,…

Coloured silicon resin-based base paint in water dispersion for filling and…

SILANCOLOR TONACHINO

Transpirant, water-repellent, thick-layered siloxane coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm…

Transpirant, water-repellent, thick-layered siloxane coating product with high…

TRIBLOCK FINISH

Three-component, epoxy-cementitious mortar for smoothing damp substrates. TECHNICAL DATA: Maximum dimension of aggregate: 0.25 mm. Mixing ratio: comp. A : comp. B : comp. C = 4.8 : 15.2 : 80. Pot…

Three-component, epoxy-cementitious mortar for smoothing damp substrates.…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…