Project Leisure, sport & event center Tägi, Wettingen, Wettingen


Yard	Tile works on a surface of over 4000 m2
Location	Wettingen, Switzerland
Subcategory	SPORT CENTER
Application	Delivery of products for the ceramic tiles
Start and finish date	2018/2020
Application Type	Floor/wall covering
Contractor company	Tägi AG, Wettingen
Installer companies	Fehlmann AG, Hunzenschwil; Anliker AG Bauunternehmung, Luzern
Architects	Scheitlin Syfrig Architekten, Luzern
Credits	Daniela Schöni, Aarau/Lenzburg
MAPEI Coordination	Raffael Schöni

ADESILEX PG4

Two-component, thixotropic epoxy adhesive with modified rheology for bonding MAPEBAND, MAPEBAND TPE, PVC strips and Hypalon and for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B =…

Two-component, thixotropic epoxy adhesive with modified rheology for bonding…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. WHERE TO USE: • Monolithic construction joints between fresh and hardened concrete. • Bonding precast concrete…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

MAPEBAND FLEXROLL

Tape for the flexible waterproofing of expansion joint and cracks. TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at failure: > 400%. Tear strength: > 600 N/cm. Shore A…

Tape for the flexible waterproofing of expansion joint and cracks. TECHNICAL…

MAPEFLOOR I 914

Two-component epoxy primer for priming cementitious bridge deck substrates before waterproofing with an asphalt or synthetic membrane layer. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1.…

Two-component epoxy primer for priming cementitious bridge deck substrates…

Mapegrout Thixotropic

Shrinkage-compensated fibre-reinforced mortar for concrete repair TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT THIXOTROPIC with 15.5-16.5 parts of…

Shrinkage-compensated fibre-reinforced mortar for concrete repair TECHNICAL…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for up to 25% movements.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER MF

Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…

Two-component, solvent-free epoxy primer used as bonding promoter for products…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRATOP

Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors.

Self-levelling, ultra-quick hardening mortar with special hydraulic binders,…