Project Pirelli Skyscraper, Milano


Yard	Regione Lombardia Building
Location	Milano, Italy
Subcategory	OFFICES
Built in	1956
Opened in	1960
Application	repairing the façade’s glass mosaic coverings, remaking the external avements laying the internal floors and consolidating the concrete structures
Start and finish date	2002/2005
Application Type	Concrete restoration
Client	Regione Lombardia
Contractor company	Grassi & Crespi Srl. e Marcora Srl; Eleca
Installer companies	Biesse, Milano; Liuni, Milano
Architects	Giò Ponti
MAPEI Distributor	Biesse, Liuni
Credits	Gianni Dal Magro, Massimiliano Nicastro - Mapei SpA
MAPEI Coordination	Andrea Aliverti,Tiziano Cerulli, Luigi Coppola, Fulvio Bianchi, Paolo Giglio, Massimiliano Nicastro e Matteo Venturini.

ADESILEX MT32

Adhesive in water dispersion for laying all types of wall coatings: tufted wallpaper, flock-print, heavy fabrics, glass fibre fabrics, etc. TECHNICAL DATA: Consistency: creamy paste. Colour: white…

Adhesive in water dispersion for laying all types of wall coatings: tufted…

ADESILEX PG1

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives.…

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1…

CARBOPLATE

Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy resin, with high…

Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a…

EPOJET LV

Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…

Two-component epoxy resin with a very low viscosity for injecting into…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

Very fast hardening two-component polyester resin. Where to use: - Sealing cracks in screeds. - By adding dry sand, Eporip Turbo can be used to manufacture mortars for small reparations. Eporip Turbo…

Very fast hardening two-component polyester resin. Where to use: - Sealing…

GRANIRAPID

Two-component high performance fast-setting and hydrating cementitious adhesive for ceramic tiles and stone materials. WHERE TO USE For bonding all kinds of interior and exterior ceramic tiles;…

Two-component high performance fast-setting and hydrating cementitious adhesive…

$LATEX PLUS$

LATEX PLUS

Latex admixture inducing elasticity to be mixed with Keraquick. Applications: Latex Plus is an admixture to be mixed with Keraquick. It improves deformability to meet the requirements of class S2…

Latex admixture inducing elasticity to be mixed with Keraquick. Applications:…

MAPEFER

Two-component corrosion-inhibiting cementitious mortar for the protection of reinforcing rods. Mapefer is a mortar made up of polymers in water dispersion, cement binders and corrosion inhibitors to…

Two-component corrosion-inhibiting cementitious mortar for the protection of…

MAPEGROUT BM

Two-component cementitious mortar with a low modulus of elasticity for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT BM comp. A with…

Two-component cementitious mortar with a low modulus of elasticity for…

NIVORAPID

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

PRIMER MF

Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…

Two-component, solvent-free epoxy primer used as bonding promoter for products…

STABILCEM SCC

Cementitious binder for manufacturing dimensionally stable self-compacting concrete mixtures to repair concrete structures. Stabilcem SCC is used to manufacture concretes with different aggregate…

Cementitious binder for manufacturing dimensionally stable self-compacting…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRABOND ECO FIX

Adhesive in water dispersion which remains permanently tacky with very low emission level of volatile organic compounds (VOC), for self-laying flooring tiles. TECHNICAL DATA: Consistency: creamy…

Adhesive in water dispersion which remains permanently tacky with very low…

ULTRABOND ECO V4 SP

Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…

Multi-purpose, acrylic adhesive in water dispersion with a long open time and…

ULTRAPLAN

Ultra fast-drying self-levelling compound for thicknesses from 1 to 10 mm. TECHNICAL DATA: Where to use: New or existing substrates, preparing them to receive all kinds of flooring where a high…

Ultra fast-drying self-levelling compound for thicknesses from 1 to 10 mm.…

ULTRABOND ECO 540

Product not available for this market,
contact us

Pirelli Skyscraper

Construction

Additional Attachments

Product used for the project

Keep in touch