Project Renovation of non-swimmer outdoor pool at Heumatten, Windisch


Yard	non-swimmer pool
Location	Windisch, Switzerland
Subcategory	SWIMMING POOL
Application	Refurbishment of a non-swimmer's pool, which was previously covered with a foil. It is now covered with ceramic tiles. From project planning to execution, everything was accompanied by Mapei.
Start and finish date	2023
Application Type	Waterproofing systems
Installer companies	Shala Plattenbeläge GmbH, Gebenstorf
Architects	U.D.O. Architekten & Planer AG, Brugg
Specialists involved	Community of Windisch
MAPEI Coordination	Raffael Schöni

ADESILEX PG4

Two-component, thixotropic epoxy adhesive with modified rheology for bonding MAPEBAND, MAPEBAND TPE, PVC strips and Hypalon and for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B =…

Two-component, thixotropic epoxy adhesive with modified rheology for bonding…

ELASTORAPID

ELASTORAPID is a two-component, highly deformable , high-performance , with extended open time , fast-setting and hydrating cementitious adhesive, with no vertical slip , for ceramic tiles and stone…

ELASTORAPID is a two-component, highly deformable , high-performance , with…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. WHERE TO USE: • Monolithic construction joints between fresh and hardened concrete. • Bonding precast concrete…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

KERAPOXY EASY DESIGN

KERAPOXY EASY DESIGN is an epoxy grout with improved workability and shining performance. Product with very low emission of volatile organic compounds (VOC), it keeps the environmental health .…

KERAPOXY EASY DESIGN is an epoxy grout with improved workability and shining…

MAPEBAND FLEXROLL

Tape for the flexible waterproofing of expansion joint and cracks. TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at failure: > 400%. Tear strength: > 600 N/cm. Shore A…

Tape for the flexible waterproofing of expansion joint and cracks. TECHNICAL…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

MAPESIL AC, solvent-free, pure acetic silicone sealant . Ideal for internal and external use on ceramic in damp settings and swimming pools. For strong seals that maintain their look over time.

MAPESIL AC, solvent-free, pure acetic silicone sealant . Ideal for internal and…

MAPETEX 50

Non-woven polypropylene fabric (weight 50 g/m²) for reinforcing waterproof membranes.

Non-woven polypropylene fabric (weight 50 g/m²) for reinforcing waterproof…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

PURTOP EASY DW

Two-component elastic polyurethane membrane for waterproofing drinking water tanks. TECHNICAL DATA: Consistency: creamy. Waiting time between each coat: 5-6 hours at +23°C. Colour: white.…

Two-component elastic polyurethane membrane for waterproofing drinking water…