Project Sahligut Learning Swimming Pool, Biel

Sahligut Learning Swimming Pool

Biel, Switzerland

Ref #: 4633

Category: SPORT FACILITIES

Construction


Yard	The Sahligut learning swimming hall was completely renovated. The overall renovation included a new chrome steel swimming pool and a new glass façade, the complete replacement of the pool water technology and the redesign of the cloakroom area.
Location	Biel, Switzerland
Subcategory	Aquatic Centre
Application	The teaching pool at the Sahligut school was built between 1967 and 1968. After 50 years of operation, a comprehensive renovation was urgently needed.
Start and finish date	2021/2022
Application Type	Floor/wall covering
Architects	Leimer Tschanz Architekten AG, Viaduktstr. 33, 2501 Biel Natalie Wyss Architektin
Specialists involved	Stadt Biel/Bienne Tobias Grimm Architekt und Projektleiter
MAPEI Coordination	Pirmin Nünlist

Product used for the project

MAPEBAND FLEXROLL

Tape for the flexible waterproofing of expansion joint and cracks. TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at failure: > 400%. Tear strength: > 600 N/cm. Shore A…

Tape for the flexible waterproofing of expansion joint and cracks. TECHNICAL…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Colour of mix: white, grey (Ral 7001) and neutral. Application…

Two-component epoxy paint for anti-acid coatings on concrete surfaces.…

MAPEFINISH

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPEGUARD WP 200

Alkali-resistant waterproofing and anti-fracture membrane for internal use; suitable for overlaying with ceramic, natural stone, and LVT floors.

Alkali-resistant waterproofing and anti-fracture membrane for internal use;…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for up to 25% movements.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

PRIMER MF EC PLUS

Two-component, solvent-free, low-viscosity, epoxy primer with a very low emission level of volatile organic compounds for consolidating and waterproofing cementitious substrates. TECHNICAL DATA:…

Two-component, solvent-free, low-viscosity, epoxy primer with a very low…