One-component pre-packed multi-purpose non-accelerated cementitious mortar applied using either the dry or damp spraying technique. Mapegrout Gunite is used for all repair of damaged concrete, such…
Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…
Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…
High-performance, silicone water-repellent in watery solution for external walls. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.02. Dry…
High-performance, silicone water-repellent in watery solution for external…
Coloured paint with a smooth finish made from acrylic resin in water dispersion, for indoor and outdoor tennis courts in porous cement, asphalt or concrete, multi-purpose playing fields, pedestrian…
Coloured paint with a smooth finish made from acrylic resin in water…
Two-component, anti-acid epoxy paint modified with hydro-carbide resin for protecting concrete and steel surfaces. TECHNICAL DATA: Consistency: component A fluid paste, component B fluid paste.…
Two-component, anti-acid epoxy paint modified with hydro-carbide resin for…
Two-component, thixotropic epoxy adhesive with modified rheology for bonding MAPEBAND, MAPEBAND TPE, PVC strips and Hypalon and for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B =…
Two-component, thixotropic epoxy adhesive with modified rheology for bonding…
Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced mortar for structural “reinforced” strengthening work, when used in combination with mesh from the MAPEGRID line, and for…
Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced…
One-component pre-blended thixotropic mortar with controlled shrinkage for anchoring, by injection, of tie rods and bolts in all types of grounds. Use Stabilcem T for anchoring tie rods of any length…
One-component pre-blended thixotropic mortar with controlled shrinkage for…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…
One-component, ultra-fluid polyurethane resin applied by injection for…
Mapecrete LI Hardener penetrates into the pores of the substrate and reacts with the free lime that is normally produced during the hydration phase of the cement. This reaction produces highly…
Mapecrete LI Hardener penetrates into the pores of the substrate and reacts…
