Only by Mapei, the complete and innovative systems for laying textiles and decorative wall coverings

Mapei, has always had a keen eye on the requirements of new design trends and proposes two new lines of highly technological, reliable and professional products dedicated to the laying of these types of floorings and coverings.

 

 

decor

Products for decorative fiberglass and wallpaper

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond Eco Decor Dry

Ready-to-use adhesive for decorative fiberglass
and wallpaper in dry areas.

Ready-to-use acrylic-based adhesive suitable for laying decorative fiberglass and wallpaper onto all kinds of absorbent substrates, in dry areas.

PRODUCT PROPERTIES

• Very easy to apply, also by roller
• Very low consumption
• Fast drying
• Emicode EC1 Plus (very low emission)

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond Eco Decor Wet

One-component, silylated polymer-based adhesive
for decorative fiberglass and wallpaper in wet areas.

Ready-to-use acrylic-based adhesive suitable for laying decorative fiberglass and wallpaper onto all kinds of standard substrates in wet areas, even on non-absorbent substrates. In combination with the protective polyurethane finish MAPECOAT DÉCOR PROTECTION, it makes it possible to install decorative fiberglass and wallpaper (as long as it is on a water resistant backing) in damp environments such as the inside of showers, creating a particularly suitable system in case of refurbishment without the need to demolish the existing wall covering.

PRODUCT PROPERTIES

• Very easy to apply by trowel and roller
• Excellent wetting
• Low consumption
• Long open time
• Makes it possible the registrability of the sheets
• Colourless, anti-yellowing and resistant to UV, it does not stain the sheets and the joints
• Fast setting
• Emicode EC1 Plus (very low emission)

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Mapecoat Decor Protection

Protective aliphatic polyurethane finish for
decorative fiberglass and wallpaper.

Two-component aliphatic, protective polyurethane finish in water dispersion for decorative fiberglass and vinyl wallpaper. When used in combination with ULTRABOND ECO DECOR WET it forms a complete, safe system for installing decorative fiberglass and vinyl wallpaper, with non woven fabric backing, in wet areas, including in shower cabins. Particularly suitable also for making it easier the cleaning of printed fiberglass and wallpaper and protecting them from UV rays.

PRODUCT PROPERTIES

• Very easy to apply by roller
• Resistant to ultra-violet rays
• Does not yellow
• Seals the joints that are splashed
• Resistant to the most common aggressive chemicals
• Mat finish

 

 

tx

Products for textiles

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond Eco TX3

Excellent wet grab “premium” adhesive with early build up
of strength for textile and linoleum floorings.

Excellent wet grab adhesive with early build up of a tough strength, suitable for bonding needle punched and textile floors with all types of backing materials onto all kinds of standard substrates, even heating systems, and on acoustic mats too. Also suitable for laying linoleum. Particularly suitable in commercial and public areas, where floors are subject even to heavy traffic (hotels, auditoriums, airports, libraries, restaurants, offices, etc.).

PRODUCT PROPERTIES

• High wet grab 
• Fast development of set 
• Quick leg development 
• High and though final strength 
• Exposure to castor wheels in accordance with EN 12529 
• Emicode EC1 PLUS (very low emission) 
• Blauer Engel DE-UZ 113 
• M1 certified 
• Low odour (ISO 16000-28) 
• Suitable for marine equipment (in compliance with Marine Equipment Directive - MED)

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond Eco TX2

"Professional" adhesive, with high initial grab
and long open time for textile floorings.

High initial grab and long open time adhesive, suitable for bonding needle-punches and textile floor coverings with all types of backing materials, onto all kinds of absorbent standard substrates, even heating systems, and on acoustic mats too. The long open time makes it easier the installation of patterned carpet. Suitable for static and dynamic loads in residential and commercial areas (offices, hotels, auditoriums, libraries, restaurants, airports, etc.).
TEXTILES


MAPEI N. 2, 3, TKB B1, B2

FLOOR



PRODUCT PROPERTIES

• Very easy to apply
• Excellent wetting
• High initial grab
• Long open time
• High and tough final strength
• Exposure to castor wheels in accordance with EN 12529
• Emicode EC1 Plus (very low emission)
• Blauer Engel DE-UZ 113 
• Suitable for marine equipment (in compliance with Marine Equipment Directive - MED)

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond Eco TX1

“Standard” hard set adhesive for textile and linoleum floorings.

Hard set adhesive, suitable for bonding needle punched and textile floor coverings with all types of backing materials, onto all kinds of absorbent standard substrates, even heating systems. Also suitable for laying linoleum. Suitable for normal and medium traffic and loads in residential and commercial areas (offices, hotel rooms, libraries, restaurants, etc.).

PRODUCT PROPERTIES

• Very easy to apply
• Excellent wetting
• High and tough final strength
• Exposure to castor wheels in accordance with EN 12529
• Emicode EC1 Plus (very low emission) 
• Blauer Engel DE-UZ 113
• M1 Certified
• Low Odour (ISO 16000-28)

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond TX57

High and fast initial grab adhesive for textile and linoleum floorings.

Excellent wet grab adhesive with early build up of a tough strength, suitable for bonding needle punched and textile floors with all types of backing materials onto all kinds of standard substrates, even heating systems. Also suitable for laying linoleum. Suitable for static and dynamic loads in residential and commercial areas (offices, hotels, auditoriums, libraries, restaurants, airports, etc); particularly suitable in winter seasons on inadequately heated building sites.

PRODUCT PROPERTIES

• Very easy to apply
• Excellent wetting
• High wet grab
• Fast development of set also at lower temperatures
• Quick leg development
• High and tough final strength
• Exposure to castor wheels in accordance with EN 12529

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond Eco Tack TX+

Carpet tile tackifier.

Acrylic-based adhesive designed to provide a permanently tacky film when dry, to allow the removal and replacement of carpet tiles when required, onto all kinds of standard substrates, smoothing compounds, existing floor coverings and raised access floor panels. Also suitable for fixing carpet pads and loose-lay LVT.

PRODUCT PROPERTIES

• Very easy to apply by roller
• Very low consumption
• Fast drying
• Easy removal or replacement of individual, damaged or worn tiles and coverings
• Exposure to castor wheels in accordance with EN 12529
• Emicode EC1 Plus (very low emission)
• Blauer Engel DE-UZ 113
• M1 certified
• Low odour (ISO 16000-28)
• Suitable for marine equipment (in compliance with Marine Equipment Directive - MED)