Cementitious and Resin Floor Coverings

The products from this line enable you to create floors of the highest technical and aesthetic quality for a vast range of uses. In fact, numerous settings can benefit from innovative flooring resistant to abrasion, impact loads, cracking and aggressive chemical agents.

Cementitious and Resin Floor Coverings

Select a product category

Cement-based flooring system

Epoxy Resin Flooring Systems

Floor wax

Polyurethane Resin Flooring Systems

ADDITIX PE

Admixture to make epoxy and polyurethane products thicker with a thixotropic consistency. TECHNICAL DATA: Appearance: powder. Colour: white. Density:…

Admixture to make epoxy and polyurethane products thicker with a thixotropic…

DECOR SYSTEM 70

SOLVENT-FREE, EPOXY POLYURETHANE SYSTEM FOR DECORATIVE FLOORS WITH A TROWEL-EFFECT FINISH. EXCELLENT RESISTANT TO WEAR FOR SHOWROOMS. APPLIED AT A…

SOLVENT-FREE, EPOXY POLYURETHANE SYSTEM FOR DECORATIVE FLOORS WITH A…

EPOXY SPEED

Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid. Colour: light yellow. Density: 0.97 g/m³. Viscosity at +23°C: 200…

Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid.…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Colour of mix: white,…

Two-component epoxy paint for anti-acid coatings on concrete surfaces.…

MAPECOAT I 600W

Two-component transparent epoxy primer in water dispersion. TECHNICAL DATA: Consistency of mix: fluid. Colour of mix: opaline. Mixing ratio: comp. A:…

Two-component transparent epoxy primer in water dispersion. TECHNICAL DATA:…

MAPECOAT I 620 W

Two-component, shiny epoxy finish in water dispersion for anti-dust and anti-grease treatments on concrete floors, cementitious substrates and as a…

Two-component, shiny epoxy finish in water dispersion for anti-dust and…

MAPECOLOR PASTE

System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410, PRIMER SN, MAPEFLOOR DECOR 700, MAPEFLOOR I 360 AS and MAPEFLOOR I 390…

System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410,…

MAPECRETE LI HARDENER

Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces…

Surface treatment in liquid form made from lithium silicate with a…

MAPECRETE STAIN PROTECTION

Hydro-oil repellent and anti-stain treatment for concrete, natural stone and cementitious surfaces made from modified organic polymers in water…

Hydro-oil repellent and anti-stain treatment for concrete, natural stone and…

MAPEFLEX PU 45 FT

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%. TECHNICAL DATA: Movement in…

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus…

MAPEFLOOR CLEANER ED

Detergent for normal degreasing operations of floors. TECHNICAL DATA: Appearance: opaque liquid. Colour: green. Solubility in water: soluble.…

Detergent for normal degreasing operations of floors. TECHNICAL DATA:…

MAPEFLOOR CPU/HD

Three-component, high-strength polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 6 to 9 mm.…

Three-component, high-strength polyurethane-cement mortar with high resistance…

MAPEFLOOR CPU/MF

Three-component, self-levelling polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 3 to 6 mm.…

Three-component, self-levelling polyurethane-cement mortar with high resistance…

MAPEFLOOR EP19 SP

Three-component epoxy mortar for acid resistant and wear-resistant flooring. Mapefloor EP19 SP is used as an acid-resistant, wear-resistant…

Three-component epoxy mortar for acid resistant and wear-resistant flooring.…

MAPEFLOOR FINISH 53 W/L

Two-component, aliphatic, transparent, shiny polyurethane finish in water dispersion with no NMP for protecting resin systems. TECHNICAL DATA: Mixing…

Two-component, aliphatic, transparent, shiny polyurethane finish in water…

MAPEFLOOR FINISH 54 W/S

Two-component, aliphatic, transparent, matt polyurethane finish in water dispersion with no NMP for protecting resin systems. TECHNICAL DATA: Mixing…

Two-component, aliphatic, transparent, matt polyurethane finish in water…

MAPEFLOOR I 300 SL

Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial floor coatings up to 4 mm thick. May be coloured with MAPECOLOR PASTE.…

Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial…

MAPEFLOOR I 302 SL

Two-component multipurpose epoxy formulate for industrial floors in compliance with standards applied to the drinks and foodstuffs industry and clean…

Two-component multipurpose epoxy formulate for industrial floors in compliance…

MAPEFLOOR I 312

Two-component, solvent-free, epoxy resin for thin self-smoothing coating and multi-layer system

Two-component, solvent-free, epoxy resin for thin self-smoothing coating and…

MAPEFLOOR I 320 SL CONCEPT

Self-levelling epoxy coating with a coloured granular finish for abrasion-resistant floors. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 :…

Self-levelling epoxy coating with a coloured granular finish for…

MAPEFLOOR I 500 W

Two-component, vapour-permeable, neutral-coloured epoxy formulate in water dispersion for industrial floors. May be coloured with MAPECOLOR PASTE.…

Two-component, vapour-permeable, neutral-coloured epoxy formulate in water…

MAPEFLOOR I 900

Two-component epoxy binder used for preparing trowelled mortar with a damp earth consistency for industrial floors. TECHNICAL DATA: Mixing ratio:…

Two-component epoxy binder used for preparing trowelled mortar with a damp…

MAPEFLOOR I 910

Two-component epoxy binder for trowelled mortar or bonding promoter for resin coatings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 : 50.…

Two-component epoxy binder for trowelled mortar or bonding promoter for resin…

MAPEFLOOR SYSTEM 31

MULTI-LAYERED EPOXY SYSTEM WITH 100% SOLIDS CONTENT FOR INDUSTRIAL FLOORS; THICKNESS FROM 0.8 TO 1.2 mm

MULTI-LAYERED EPOXY SYSTEM WITH 100% SOLIDS CONTENT FOR INDUSTRIAL FLOORS;…

MAPEFLOOR SYSTEM 32

SOLVENT-FREE, MULTI-LAYER 3-3.5 mm THICK EPOXY SYSTEM FOR INDUSTRIAL FLOORS.

MAPEFLOOR SYSTEM 33

SELF-LEVELLING EPOXY COATING SYSTEM WITH 100% SOLIDS CONTENT FOR INDUSTRIAL FLOORS; 2-4 mm THICKNESS.

SELF-LEVELLING EPOXY COATING SYSTEM WITH 100% SOLIDS CONTENT FOR INDUSTRIAL…

MAPEFLOOR SYSTEM 34

SOLVENT-FREE, COLOURED EPOXY PAINT SYSTEM FOR INDUSTRIAL FLOORS, WITH DUST AND OIL-REPELLENT CHARACTERISTICS.

SOLVENT-FREE, COLOURED EPOXY PAINT SYSTEM FOR INDUSTRIAL FLOORS, WITH DUST AND…

MAPEFLOOR SYSTEM 51

SOLVENT-FREE, VAPOUR-PERMEABLE, MULTI-LAYER, MATT EPOXY SYSTEM IN WATER DISPERSION. AVERAGE 3 mm THICK FOR NON-SLIP INDUSTRIAL FLOOR FINISHES.

SOLVENT-FREE, VAPOUR-PERMEABLE, MULTI-LAYER, MATT EPOXY SYSTEM IN WATER…

MAPEFLOOR SYSTEM 52

MULTI-LAYER VAPOUR-PERMEABLE EPOXY COATING SYSTEM IN WATER DISPERSION WITH A MATT NON-SLIP FINISH FOR INDUSTRIAL FLOORS. THICKNESS 5 mm.

MULTI-LAYER VAPOUR-PERMEABLE EPOXY COATING SYSTEM IN WATER DISPERSION WITH A…

MAPEFLOOR SYSTEM 53

SELF-LEVELLING VAPOUR-PERMEABLE EPOXY COATING SYSTEM IN WATER DISPERSION WITH A SMOOTH MATT FINISH FOR INDUSTRIAL FLOORS; THICKNESS 4 mm

SELF-LEVELLING VAPOUR-PERMEABLE EPOXY COATING SYSTEM IN WATER DISPERSION WITH A…

MAPEFLOOR SYSTEM 91

TROWELLED EPOXY MORTAR COATING SYSTEM FOR INDUSTRIAL FLOORS, IDEAL FOR RENOVATING OLD FLOORS; THICKNESS 6 TO 15 mm Products

TROWELLED EPOXY MORTAR COATING SYSTEM FOR INDUSTRIAL FLOORS, IDEAL FOR…

MAPEFLOOR SYSTEM AS

SELF-LEVELLING EPOXY SYSTEM WITH A TOTAL SOLID CONTENT FOR ANTISTATIC, CONDUCTIVE INDUSTRIAL FLOORS; THICKNESS 1.5-2 mm

SELF-LEVELLING EPOXY SYSTEM WITH A TOTAL SOLID CONTENT FOR ANTISTATIC,…

MAPEFLOOR WAX REMOVER

De-waxing, multi-action detergent for removing all types of metallic wax including the double-reticulation type, such as MAPELUX LUCIDA or MAPELUX…

De-waxing, multi-action detergent for removing all types of metallic wax…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20.…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

PRIMER W-AS

Two-component epoxy primer in water dispersion for electrically conductive coatings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 25 : 75.…

Two-component epoxy primer in water dispersion for electrically conductive…

QUARZO 0.25 - 0.5 - 0.9 - 1.2 - 1.9

Washed kiln-dried quartz sand for use with epoxy and polyurethane resin

Concrete and resin, between aesthetics and technique

The Mapei research and development laboratories have developed a series of systems for epoxy, polyurethane and cementitious floors which allow users to upgrade floors quickly and efficiently to match their real use. Our proposals are also certified according to the most severe standards and are widely used in numerous sectors of industry such as the food and chemical-pharmaceuticals industries, in contemporary surroundings, places of artistic interest, open offices and in industrial, civil and commercial settings