Project City of Dreams (Macau),

City of Dreams (Macau)

Hong Kong

Ref #: 852007

Category: COMMERCIAL FACILITIES


Yard	Hotel, Mall, Pool
Location	Hong Kong
Subcategory	HOTEL/INN
Application	MAPEI's construction materials were chosen for waterproofing, tile installation, rendering and floor screeding.
Start and finish date	2008/2009
Application Type	Floor/wall coverings
Contractor company	Joint Venture of Leighton, China State and John Holland
Installer companies	1. Themeworks International (Macau) Ltd / 2. iTop Construction Materials & Engineering Co Ltd/ 3. ASTEL (Macau) Ltd/ 4. Pat Davie (Macau) Ltd.
Architects	Melco Crown Entertainment Limited
MAPEI Distributor	Mapei China Ltd (Hong Kong)

Product used for the project

ADESILEX P10

High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm). Conformity of Adesilex P10…

High-performance, white cementitious adhesive with no vertical slip and…

ISOLASTIC

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…

KERACRETE

Synthetic latex rubber mixed with KERACRETE POWDER (white or grey) or with sand and cement (thickness up to 5 mm). TECHNICAL DATA OF KERACRETE + KERACRETE POWDER: Pot life of mix: 90 minutes. Open…

Synthetic latex rubber mixed with KERACRETE POWDER (white or grey) or with sand…

KERAFLEX

Keraflex is the family of cementitious adhesives characterised by high performance and extreme versatility for installing ceramic tiles and stone, including large formats and over large surfaces.…

Keraflex is the family of cementitious adhesives characterised by high…

KERALASTIC T

wo-component, high-performance polyurethane adhesive with no vertical slip for ceramic tiles and stone material. Conformity of Keralastic T is declared in ITT certificates n° 25040471/Gi (TUM) issued…

wo-component, high-performance polyurethane adhesive with no vertical slip for…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVOPLAN

Levelling mortar for interior and exterior walls and ceilings. Applications: Interior and exterior levelling "out-of-plumb" walls, rough or damaged renders, brick walls before laying ceramic tiles.…

Levelling mortar for interior and exterior walls and ceilings. Applications:…

PLANICRETE LATEX

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 47%. Storage: 12 months. Consumption: - for adhesive slurry: 100-150 g/m²; -…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…