EPOXY GROUT

KARAKTERISTIK UTAMA DAN APLIKASI

 May 5, 2021. 10:44 AM

Apa karakteristik utama dari grout yang berbahan dasar epoxy resin?
Grout berbasis epoxy resin umumnya merupakan produk dua komponen yang tahan terhadap asam agresif dan kedap air. Juga memiliki karakter yang rigid dan sangat tahan terhadap kompresi.

Kapan Anda harus menggunakan nat epoxy?
Untuk menutup material yang akan bersentuhan dengan asam, misalnya di kolam renang, industri makanan dan minuman, atau bahkan untuk meja dapur di dapur rumah tangga. Dalam kasus seperti itu, makanan atau asam apa pun yang pasti bersentuhan dengan nat tidak akan dapat menyerang secara kimiawi dan mengikisnya.

Picture3

Apakah sulit menggunakan produk berbahan resin?
Tidak lagi. Banyak kemajuan yang telah dibuat di bidang produk kimia untuk industri bangunan dan sekarang kami dapat memproduksi grout berbahan dasar resin epoxy dua komponen dengan konsistensi seperti krim, yang membuatnya lebih mudah digunakan dan dibersihkan dari permukaan.

Apa langkah terpenting saat menggunakan epoxy grouts?
1. Kedua komponen yang membentuk nat harus dicampur secara menyeluruh dan sempurna. Tahap ini perlu dilakukan dengan sangat hati-hati, jika memungkinkan dengan mixer otomatis berkecepatan rendah, pastikan kedua komponen dalam produk dicampurkan dengan benar. Kami menyarankan Anda untuk tidak membagi komponen (misal, menggunakan hanya sebagian dari dua komponen), jika tidak, ada kemungkinan produk tidak mengeras dengan benar, dan karakteristik kimianya dapat terpengaruh.
2. Dalam beberapa menit setelah mengisi sambungan dengan produk, penutup lantai atau dinding harus dibersihkan dengan air.

Picture4

Dalam kasus apa Anda tidak boleh menggunakan nat berbasis resin?
Tidak ada batasan teknis tertentu untuk menggunakannya, tetapi biasanya Anda tidak boleh menggunakan resin epoxy pada ubin tertentu atau batu berpori. Mengapa? Karena nat bisa mengendap di pori-pori material dan Anda tidak akan bisa menghilangkannya.

Jadi, apakah nat resin lebih baik daripada nat semen?
Tidak, perbedaannya bergantung pada kebutuhan spesifik masing-masing area. Jika ada risiko agresi dari asam, kami sarankan menggunakan resin, dalam case lain semen memiliki sifat kinerja yang sangat baik.
Nat epoxy yang dibuat oleh Mapei bernama KERAPOXY. Di antaranya, KERAPOXY CQ digunakan untuk sambungan dengan lebar 3 mm ke atas, sedangkan KERAPOXY DESIGN telah dikembangkan secara khusus untuk grouting mosaic dengan sambungan hingga lebar 3 mm. Produk ini sangat andal dengan sifat kinerja tinggi dan diperlukan perhatian ekstra selama tahap persiapan dan pembersihan, serta dibuktikan dengan hasil akhir yang berkualitas dan berdaya tahan tinggi.


Hubungi kami untuk kebutuhan project anda

Epoxy grouts

MAIN CHARACTERISTICS AND APPLICATION FIELDS

What are the main characteristics of epoxy resin-based grouts?
Epoxy resin-based grouts are generally two-component products resistant to aggressive acids and are impermeable. Also, they are rigid and highly resistant to compression.

When should you use epoxy grouts?
For covering materials that will be in contact with acids, for example in the swimming pool, food and beverages industry, or even for worktops in domestic kitchens. In such cases, any food or acids that inevitably come into contact with the grout will not be able to attack it chemically and erode it.

Picture3

Is it difficult to use resin-based products?
Not any more, no. A lot of progress has been made in the field of chemical products for the building industry and we are now able to produce two-component, epoxy resin-based grouts with a creamy consistency, which makes them much easier to use and clean off surfaces.

What are the most important steps when using epoxy grouts?
1. The two components that make up the grout must be mixed together thoroughly and completely. This operation needs to be carried out very carefully, if possible with an automatic mixer at low-speed, making sure the two components in the product are amalgamated correctly. We recommend you don’t divide the components (that is, use only partial quantities of the two components), otherwise the product may not harden correctly, and its chemical characteristics could be affected.
2. Within a few minutes of filling the joints with product, the floor or wall covering must be cleaned with water.

Picture4

In which cases should you not use resin-based grout?
There aren’t any particular technical limitations to using it, but normally you shouldn’t use epoxy resin for particularly porous tiles or stone. Why? Because the grout could be deposited in the pores of the material and you wouldn’t be able to remove it.

So, when all’s said and done, is resin grout better than cementitious grout?
No, the difference rather depends on each site’s specific needs. If there is a risk of aggression from acids then we use resin, in all other situations cement has excellent performance properties. The family of epoxy grouts made by Mapei is called KERAPOXY. Amongst these products, KERAPOXY CQ is used for joints 3 mm wide and above, while KERAPOXY DESIGN has been specifically developed for grouting mosaic with
joints up to 3 mm wide. These are highly reliable, technological products with high performance properties and the extra attention required during the preparation and cleaning phases is justified by the end result: quality and durability of the highest order.

Contact us for your project needs.
 

Products mentioned in the article

KERAPOXY CQ
KERAPOXY CQ
Two-component epoxy grout, easy to apply and excellent cleanability, with a bacteriostatic agent and BioBlock ® technology, ideal for…
KERAPOXY
KERAPOXY
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone…

Comments

Load more comments

Login or Register
to MyMapei Area to insert your comment

Keep in touch

Subscribe to our newsletter to get Mapei news