Ready to use polyrethane one-component, solvent-free, elastic, adhesive with very low emission of volatile organic compounds, for all types of wood and laminated flooring.
Ready to use polyrethane one-component, solvent-free, elastic, adhesive with…
Two-component cement mortar for concrete finishing Where to use For superficial protection and levelling of concrete surfaces. Consumption 2 kg/m2 per mm of thickness. Packaging Units of 30.5 kg…
Two-component cement mortar for concrete finishing Where to use For superficial…
Fluid epoxy impregnator in water dispersion for consolidating and priming wooden structures. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 1 : 1. Workability time: 30-40 minutes. Final hardening…
Fluid epoxy impregnator in water dispersion for consolidating and priming…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced stitching in masonry. TECHNICAL DATA: Tensile modulus of elasticity: 170,000 N/mm². Content of fibre by weight: 68%. Tensile…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced…
Alkali-resistant fibreglass mesh for reinforcing interior and exterior levelling compounds. Alkali-resistant Fibreglass Mesh 4x4.5 mm, 1,000 mm long for insertion as reinforcing in the first layer…
Alkali-resistant fibreglass mesh for reinforcing interior and exterior…
Film-forming curing compound in water emulsion for concrete. Mapecure SP is a white water emulsion of special resins which forms an effecient curing film on concrete. Mapecure SP provides reliable…
Film-forming curing compound in water emulsion for concrete. Mapecure SP is a…
Multipurpose plasticiser for concrete with a mild retarding effect. Mapemix R64 is used to manufacture concrete with high fluidity if used in large quantities (consistency class S4 and S5 according…
Multipurpose plasticiser for concrete with a mild retarding effect. Mapemix R64…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X414 is recommended for preparing very fluid (UNI 9858 and ENV 206 consistency classes S4 or S5) high-performance concrete that…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X414 is…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X404 is formulated for the preparation of high performance concrete with high fluidity (consistency class S4 and S5 according to…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X404 is…
Super-plasticizing admixture for concrete Where to use Mapefluid IF328 is used for: – precast concrete; – quality concrete. Dosage By volume: 0.8-2.1 l per 100 kg of cement. Packaging 200 l drums;…
Super-plasticizing admixture for concrete Where to use Mapefluid IF328 is used…