MAPEFLOOR FINISH 630

Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors.
TECHNICAL DATA:
Mixing ratio: comp. A: comp. B: = 10 : 0.15.
Colour of mix: transparent, milky.
Consistency of mix: fluid.
Dry substances content (3 h - 105°C) (%): 23.
Density of mix (kg/m³): 1,028.
Viscosity of mix (mPa·s): 25 (# 1 - 100 rpm).
Workability time: 60 min.
Surface temperature: from +12°C to +30°C.
Varnishing: after 6-8 h at +23°C.
Dust dry at +23°C and 50% R.H.: 2 h.
Abrasion resistance (Taber abrasimeter) (CS17 disk - 500 revs - 1,000 g) after 7 days (mg): 65.
Set to light foot traffic at +23°C and 50% R.H.: 24 h.
Final hardening time: 4 days.
Storage: 12 months in its original sealed packaging. Protect from frost.
Application: short-haired roller such as mohair or a suitable airless spray system.
Consumption: 0.15-0.2 kg/m² according to the grade of porosity and absorption of the substrate.
Packaging: 2 kits (A+B) of 10 + 0.150 kg units.

MAPEFLOOR FINISH 630 is part of the lines:

Related documentation

Technical data sheet
Download

Last Projects MAPEFLOOR FINISH 630

Category icon COMMERCIAL FACILITIES

2020

Office at World Tech Centre

Kwun Tong, Hong Kong

Floor/wall covering

Category icon TOURISM AND WELLNESS

2020

Hotel Komune - Bali

Gianyar, Indonesia

Installation of floors

Category icon RESIDENTIAL BUILDINGS

2018

Funnel House

Nilai, Malaysia

Resin floors application

Category icon COMMERCIAL FACILITIES

2019

Foxton Store - Shopping Iguatemi

Brazil

Surface preparation

Keep in touch

Subscribe to our newsletter to get Mapei news