Project Ballószög Thermal SpA, Ballószög


Yard	Floor/wall coverings
Location	Ballószög, Hungary
Subcategory	Spa
Built in	2004
Opened in	2005
Application	Installation of different kind of ceramic tiles
Application Type	Floor/wall coverings
Contractor company	Debmut Rt
Installer companies	Domino Kft
MAPEI Distributor	Aranykor Home of Elderlies Endowment
Project Manager	Nagy Sandor

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

FIBERPLAN

Self-levelling, fibre-reinforced, quick-hardening smoothing compounds for thicknesses from 3 to 10 mm. Particularly recommended for wood. TECHNICAL DATA: Where to use: internal ceramic, natural…

Self-levelling, fibre-reinforced, quick-hardening smoothing compounds for…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

GRANIRAPID

Two-component, high-performance, deformable, quick-setting and drying cementitious adhesive for ceramic tiles and stone material (thickness of adhesive up to 10 mm). TECHNICAL DATA: Consistency:…

Two-component, high-performance, deformable, quick-setting and drying…

IDROSILEX PRONTO

Osmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approximately 1 hour.…

Osmotic cementitious mortar suitable for contact with drinking water for…

ISOLASTIC

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

KERASET

Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: 6-8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 3-6 hours; –…

Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm).…

MAPECOAT W

Two-component, epoxy paint in water dispersion for protecting cementitious substrates. TECHNICAL DATA: Consistency: component A fluid paste, component B thick paste. Colour: component A transparent,…

Two-component, epoxy paint in water dispersion for protecting cementitious…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPEPRIM SP

Two-component, solvent-free primer for smoothing compounds and adhesives on non-absorbent surfaces. TECHNICAL DATA: Consistency: comp. A: liquid; comp. B: liquid. Colours: comp. A: blue; comp. B:…

Two-component, solvent-free primer for smoothing compounds and adhesives on…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NOVOPLAN 21

Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5 mm. Where to use: - Interior levelling of new or existing substrates to make them ready to receive resilient or textile…

Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5…

PLANICRETE

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ROLLCOLL

Multi-purpose adhesive in water dispersion for laying vinyl floors and walls and for bonding textile floors and walls with all types of backing. TECHNICAL DATA: Consistency: creamy paste. Colour:…

Multi-purpose adhesive in water dispersion for laying vinyl floors and walls…

TOPCEM

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRABOND ECO V4 SP

Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…

Multi-purpose, acrylic adhesive in water dispersion with a long open time and…