Project Centuria condominium, Budapest

Centuria condominium

Budapest, Hungary

Ref #: 82021

Category: RESIDENTIAL BUILDINGS


Yard	Thermal insulation, installation of ceramic tiles, industrial floor in the garage.
Location	Budapest, Hungary
Subcategory	HOUSE
Application	Thermal insulation, installation of ceramic tiles, industrial floor in the garage.
Start and finish date	2016/2017
Application Type	Cementitious & resin flooring systems, Floor/wall coverings, Installation of floors, New building
Client	Centuria Ingatlanfejlesztő Ltd.
Contractor company	HTMR Ltd., Domino Ltd., Thermodizayn Ltd.
Installer companies	Domino Ltd., József Sárréti
MAPEI Distributor	Domino Kft.
Credits	Dávid Kecskeméti
MAPEI Coordination	Zsolt Lakatos

Product used for the project

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPEBAND EASY

Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems.

Rubber tape sandwiched between two layers of non-woven fabric to form elastic…

MAPEFLOOR I 910

Two-component epoxy binder for trowelled mortar or bonding promoter for resin coatings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 : 50. Colour of mix: transparent straw-coloured.…

Two-component epoxy binder for trowelled mortar or bonding promoter for resin…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPETHERM NET

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems. TECHNICAL DATA: Composition: 100% glass…

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

QUARZOLITE TONACHINO

High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…

High-protection, thick-layered acrylic coating product with high filling…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRALITE S2

One-component, high-performance, highly-deformable, lightweight cementitious adhesive with extended open time, very high yield, easy to trowel and good buttering capacity, for ceramic tiles and…

One-component, high-performance, highly-deformable, lightweight cementitious…