Project Coppedè Condominium, Rome


Yard	restoration of façades
Location	Rome, Italy
Subcategory	CONDOMINIUM
Built in	2009
Opened in	2010
Application	façades restoration and painting
Application Type	Masonry restoration
Client	Soprintendenza del Comune di Roma
Contractor company	Si. Re. Co. srl
Architects	arch. Antonio Zonfrillo
Credits	Corrado Villa Presutti

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

COLORITE PERFORMANCE

Protective acrylic paint with high resistance to UV rays for internal and external use, available in a wide range of colours. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…

Protective acrylic paint with high resistance to UV rays for internal and…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

EPOJET LV

Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…

Two-component epoxy resin with a very low viscosity for injecting into…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPE-ANTIQUE FC

Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing mortars applied on lime-based renders. Respectively available in white and light pink. Mape-Antique FC is a…

Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEWRAP 11

Two-component, normal-setting, thixotropic epoxy grout for evening out concrete surfaces and for structural bonding. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 35…

Two-component, normal-setting, thixotropic epoxy grout for evening out concrete…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

MAPEWRAP G FIOCCO

High-strength glass fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”. TECHNICAL DATA: Type of fibre: E type glass. Diameters…

High-strength glass fibre cord to be impregnated with MAPEWRAP 21…

PLANITOP 400

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer. TECHNICAL DATA: Maximum…

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the…

PLANITOP 560

Lime-cement skimming mortar with an ultra-fine-textured finish for render. TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of PLANITOP 560 with 39-43 parts of water.…

Lime-cement skimming mortar with an ultra-fine-textured finish for render.…

SILANCOLOR CLEANER PLUS

Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water.…

Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…