Project Hilton Hotel u Dubrovniku, Dubrovnik


Yard	New floorings
Location	Dubrovnik, Croatia
Subcategory	HOTEL/INN
Built in	2006
Opened in	2006
Application	Installation of ceramic and natural stone tiles
Application Type	Floor/wall coverings
Installer companies	AB KERAMIKA, Dubrovnik, Croatia
Architects	Alfa Plan, Stijepo Butijer
MAPEI Distributor	AB KERAMIKA, Dubrovnik, Croatia
Credits	Hotel Hilton Imperial

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

GRANIRAPID

Two-component, high-performance, deformable, quick-setting and drying cementitious adhesive for ceramic tiles and stone material (thickness of adhesive up to 10 mm). TECHNICAL DATA: Consistency:…

Two-component, high-performance, deformable, quick-setting and drying…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEFOAM

Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…

Closed-cell, extruded foam polyethylene cord used as a support for elastomer…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

TOPCEM

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…