Project Hotel Palace Portorož, Portoroz


Yard	Floor/wall covering
Location	Portoroz, Slovenia
Subcategory	HOTEL/INN
Built in	2006
Opened in	2008
Application	Laying ceramic tiles and mosaic, stone material, wood strips in swimming pools, balconies, bathrooms, kitchen, wellness center and terrace.
Application Type	Floor/wall coverings
Contractor company	Kraški zidar, d.d., Sežana
Installer companies	Scarbo, d.o.o., Bertoki
MAPEI Distributor	Scarbo, d.o.o., Koper (Capodistria)
Project Manager	Franc Zorč, u.d.i.g.

ADESILEX P10

High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life…

High-performance, white cementitious adhesive with no vertical slip and…

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPE-ANTIQUE FC

Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing mortars applied on lime-based renders. Respectively available in white and light pink. Mape-Antique FC is a…

Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PLANITOP 400

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer. TECHNICAL DATA: Maximum…

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the…

PLANITOP 540

Water-repellent cementitious skimming mortar with a fine-textured, natural finish for render and concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP…

Water-repellent cementitious skimming mortar with a fine-textured, natural…

PRIMER PU60

Moisture curing polyurethane resin for consolidating and waterproofing damp screeds. TECHNICAL DATA: Consistency: liquid. Colour: brown. Dilution ratio: from 25 to 100% with THINNER PU. Set to light…

Moisture curing polyurethane resin for consolidating and waterproofing damp…

SILEXCOLOR PITTURA

Highly-transpirant silicate paint with a high chemical bond for internal and external surfaces, according to DIN 18363 Standards. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…

Highly-transpirant silicate paint with a high chemical bond for internal and…

SILEXCOLOR PRIMER

Highly transpirant silicate undercoat with a smooth finish, according to DIN 18363 Standards. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx.…

Highly transpirant silicate undercoat with a smooth finish, according to DIN…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRABOND P902 2K

Two-component, epoxy-polyurethane adhesive for bonding all types and sizes of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM or TOPCEM PRONTO, cementitious screeds, old wooden, ceramic,…

Two-component, epoxy-polyurethane adhesive for bonding all types and sizes of…