Project JUMEIRAH MARSA AL ARAB, Dubai


Yard	Apartments, swimming pools
Location	Dubai, United Arab Emirates
Subcategory	HOTEL/INN
Built in	2019
Opened in	2023
Application	Mapei's products and expertise have been utilized in various aspects, such as interior and exterior floor installations, outdoor decks, waterproofing, and concrete strengthening.
Start and finish date	2019/2023
Application Type	Concrete restoration systems, Tile & stone installation systems, Waterproofing systems
Client	Marsa Al Arab
Contractor company	ASGC
Specialists involved	ATK Engineering Consultants, Killa Design, Aecom, Wilson Asso, HBA

ADESILEX P10

High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life…

High-performance, white cementitious adhesive with no vertical slip and…

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

ISOLASTIC

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When…

KERABOND T

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before…

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

KERAPOXY ADHESIVE

Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12…

Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

MAPESTONE TFB 60

Pre-blended mortar with high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater with exceptional physical-chemical characteristics suitable for areas exposed…

Pre-blended mortar with high compressive strength and good resistance to…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRABOND P990 1K

One-component, ready-to-use, solvent-free, flexible polyurethane adhesive for all types of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM and TOPCEM PRONTO, cementitious screeds, old…

One-component, ready-to-use, solvent-free, flexible polyurethane adhesive for…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…