Project Kvinabadet, Kvinesdal

Kvinabadet

Kvinesdal, Norway

Public swimming pool

Ref #: 2

Category: SPORT FACILITIES


Yard	Swimming pools and bathrooms
Location	Kvinesdal, Norway
Subcategory	SWIMMING POOL
Built in	2017
Opened in	2017
Application	Waterproofing, adhesives, sealants and grouts for wet areas
Start and finish date	2016/2017
Application Type	New building, Sealants application, Waterproofing systems
Client	Kvinesdal county
Contractor company	Kvinesdal county
Installer companies	Murmester Arnt Kristensen AS
Architects	Ratio Arkitekter AS
MAPEI Distributor	Mapei AS
Credits	Sindre Ellingsen
Link to details page	http://kvinabadet.no/

Product used for the project

KERAPOXY CQ

Two-component epoxy grout, easy to apply and excellent cleanability, with a bacteriostatic agent and BioBlock ® technology, ideal for grouting ceramic tiles and mosaics. Can also be used as an…

Two-component epoxy grout, easy to apply and excellent cleanability, with a…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPETHERM AR1 LIGHT

One-component, lightweight, cementitious mortar for bonding and skimming insulating panels and thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: white. Density of the mix…

One-component, lightweight, cementitious mortar for bonding and skimming…

SILANCOLOR BASE COAT

Water-repellent, coloured acrylic undercoat with a smooth finish and good filling properties for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…

Water-repellent, coloured acrylic undercoat with a smooth finish and good…

Transpirant, water-repellent, thick-layered siloxane coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm…

Transpirant, water-repellent, thick-layered siloxane coating product with high…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRALITE S1

One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time, Low Dust technology and extremely high yield easy to apply by trowel, for ceramic…

One-component, high-performance, deformable, lightweight cementitious adhesive…

ULTRALITE S2

One-component, high-performance, highly-deformable, lightweight cementitious adhesive with extended open time, very high yield, easy to trowel and good buttering capacity, for ceramic tiles and…

One-component, high-performance, highly-deformable, lightweight cementitious…