Project Nagyerdei Footnall Stadium, Debrecen

Nagyerdei Footnall Stadium

Debrecen, Hungary

Ref #: 5604

Category: SPORT FACILITIES


Yard	soccer stadium
Location	Debrecen, Hungary
Subcategory	STADIUM
Application	waterproofing, concrete repair, ceramics installation, laying of carpet and resina application on floors
Start and finish date	2014
Application Type	Products for sports flooring
Contractor company	Hunép Zrt. & Épker Service Zrt.
Installer companies	Aqua-Stop Kft; Jova Kft., Krismerker Kft; Fülöp és Fia Bt.
Specialists involved	BORD Építész Stúdió
MAPEI Coordination	Szénás Krisztián

Product used for the project

MAPECURE E30

Anti-evaporation agent in water emulsion for protecting the surface of concrete against quickly drying out when exposed to sunlight and winds. TECHNICAL DATA: Application: spray Consumption: - neat:…

Anti-evaporation agent in water emulsion for protecting the surface of concrete…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEFILL

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water. Pot life of mix:…

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum…

MAPEFINISH

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…

MAPEFLOOR SYSTEM 31

MULTI-LAYERED EPOXY SYSTEM WITH 100% SOLIDS CONTENT FOR INDUSTRIAL FLOORS; THICKNESS FROM 0.8 TO 1.2 mm

MULTI-LAYERED EPOXY SYSTEM WITH 100% SOLIDS CONTENT FOR INDUSTRIAL FLOORS;…

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430 with 17.5-18.5…

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…