Project Neftohimik Building,


Yard	Stone application and facade renovation
Location	Bulgaria
Subcategory	INDUSTRY
Built in	2019
Opened in	2020
Application	Products for ceramic and stone materials
Start and finish date	2019/2020
Application Type	Facade interventions, Installation of floors, Waterproofing systems
Client	Municipality of Burgas
Contractor company	Bulplast BG
Installer companies	Max Group
Project Manager	Marin Tzvetkov
MAPEI Coordination	Ivan Ivanov, Nikolay Zheliazkov, Petar Yankov

ADESILEX PG4

Two-component, thixotropic epoxy adhesive with modified rheology for bonding MAPEBAND, MAPEBAND TPE, PVC strips and Hypalon and for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B =…

Two-component, thixotropic epoxy adhesive with modified rheology for bonding…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERALASTIC T

Two-component, high-performance polyurethane adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to…

Two-component, high-performance polyurethane adhesive with no vertical slip for…

MAPEFOAM

Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…

Closed-cell, extruded foam polyethylene cord used as a support for elastomer…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

MAPELUX LUCIDA

Double-reticulation, high-strength shiny metallic wax. TECHNICAL DATA: Appearance: emulsion. Colour: bluish-white. Application temperature range: from +10°C to +30°C. pH: 8.4 ± 0.2. Storage: 12…

Double-reticulation, high-strength shiny metallic wax. TECHNICAL DATA:…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPETHERM NET

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems. TECHNICAL DATA: Composition: 100% glass…

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when…

PLANICRETE

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PLASTIMUL

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA: Consistency: thick paste. Density: 1.2 g/cm³. pH: 10. Dry solids content: approx. 76%. Storage: 12 months. Minimum application…

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA:…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

TOPCEM

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints 2 to 20 mm wide.…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRATOP LOFT F

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect. TECHNICAL DATA: Consistency: powder.…

One-component trowellable coarse-textured cementitious paste applied in layers…