Super-plasticizers based on a modified acrylic polymer for ready-mix concrete with low water/cement ratio, extremely high mechanical strength and long slump retention Where to use Dynamon SR3 is…
Super-plasticizers based on a modified acrylic polymer for ready-mix concrete…
Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…
Two-component epoxy resin with a very low viscosity for injecting into…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X414 is recommended for preparing very fluid (UNI 9858 and ENV 206 consistency classes S4 or S5) high-performance concrete that…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X414 is…
Two-component cementitious mortar with a low modulus of elasticity for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT BM comp. A with…
Two-component cementitious mortar with a low modulus of elasticity for…
One-component pre-packed multi-purpose non-accelerated cementitious mortar applied using either the dry or damp spraying technique. Mapegrout Gunite is used for all repair of damaged concrete, such…
Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT FAST-SET…
Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for…
Two-component cement mortar for concrete finishing Where to use For superficial protection and levelling of concrete surfaces. Consumption 2 kg/m2 per mm of thickness. Packaging Units of 30.5 kg…
Two-component cement mortar for concrete finishing Where to use For superficial…
One-component pre-blended thixotropic mortar with controlled shrinkage for anchoring, by injection, of tie rods and bolts in all types of grounds. Use Stabilcem T for anchoring tie rods of any length…
One-component pre-blended thixotropic mortar with controlled shrinkage for…