Project Robinson Blue Hotel, Ierapetra

Robinson Blue Hotel

Ierapetra, Greece

Ref #: 5

Category: TOURISM AND WELLNESS


Yard	Hotel interior and exterior floors
Location	Ierapetra, Greece
Subcategory	CLUB, HOTEL/INN
Opened in	2018
Application	Supply of products for waterproofing, floors and walls covering
Start and finish date	2018/2020
Application Type	Waterproofing systems
Contractor company	Η-Κ ΑΕΒΕ
Installer companies	Thermal Insulation: Labrokonstantakis Pantelis, Waterproofing: Malliotakis George
Architects	Alpha Architecture Alexandrakis & Partners
Specialists involved	Alpha Architecture Alexandrakis & Partners
MAPEI Distributor	Baxevanis
Credits	Christos Drazos
MAPEI Coordination	Rerras Panagiotis

Product used for the project

DYNAMON EASY 11

Modified acrylic-based super-plasticizer for ready-mixed concrete Where to use Dynamon Easy 11 is particularly suitable for use in ready-mix concrete sector and whenever the amount of water needs to…

Modified acrylic-based super-plasticizer for ready-mixed concrete Where to use…

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEFILL

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water. Pot life of mix:…

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum…

MAPEGROUT TISSOTROPICO

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…

MAPETHERM AR1

One-component cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey. Density of the mix (kg/m³): 1,450.…

One-component cementitious mortar for bonding and levelling insulation panels…

MAPETHERM AR1 GG

One-component, large-grained cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey and white Density of…

One-component, large-grained cementitious mortar for bonding and levelling…

MAPETHERM EPS

Extruded sintered polystyrene insulating panels for thermal insulation systems. TECHNICAL DATA: Composition: sintered expanded polystyrene. Colour: white. Thickness available cm: 4, 5, 6, 8 and 10.…

Extruded sintered polystyrene insulating panels for thermal insulation systems.…

MAPETHERM NET

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems. TECHNICAL DATA: Composition: 100% glass…

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

QUARZOLITE TONACHINO

High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…

High-protection, thick-layered acrylic coating product with high filling…