Project Sem-Abrigo welcome centre, Ponta Delgada


Yard	welcome centre
Location	Ponta Delgada, Portugal
Subcategory	APARTMENTS
Built in	2017
Opened in	2018
Application	supply of products for thermal insulation and resins for floors
Start and finish date	2017/2018
Application Type	Facade interventions, Cementitious & resin flooring systems
Client	Cáritas Diocesana dos Açores
Contractor company	Marques, S.A.
Installer companies	Spitex II
Architects	Arq.º Óscar Catarino (Box Arquitetos)
Specialists involved	Arq.º Óscar Catarino (Box Arquitetos)
MAPEI Distributor	Spitex II

MAPECOAT TNS PROTECTION

Two-component transparent protective finish for products from the Mapecoat TNS line

Two-component transparent protective finish for products from the Mapecoat TNS…

MAPECOAT TNS URBAN

MAPECOAT TNS URBAN is an acrylic resin in water dispersion with selected fillers specifically formulated in MAPEI Research & Development laboratories for coating and protecting cycle lanes ,…

MAPECOAT TNS URBAN is an acrylic resin in water dispersion with selected…

MAPECOAT TNS WHITE BASE COAT

Acrylic resin basecoat and filling paste in water dispersion with selected fillers for multi-layer systems from the Mapecoat TNS range

Acrylic resin basecoat and filling paste in water dispersion with selected…

MAPECOLOR PASTE

System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410, PRIMER SN, MAPEFLOOR DECOR 700, MAPEFLOOR I 360 AS and MAPEFLOOR I 390 EDF. N.B.: other RAL colours available upon…

System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410,…

MAPEFLOOR FINISH 52 W

Two-component, polyurethane finishing product in water dispersion with low yellowing properties, for anti-dust and anti-oil treatments. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 87 : 13.…

Two-component, polyurethane finishing product in water dispersion with low…

MAPEFLOOR FINISH 58 W

Two-component, aliphatic, transparent or coloured, matt polyurethane finish in water dispersion. TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix:…

Two-component, aliphatic, transparent or coloured, matt polyurethane finish in…

Double-reticulating, high-strength matt metallic wax. TECHNICAL DATA: Appearance: emulsion. Colour: bluish-white. Application temperature range: from +10°C to +30°C. pH: 8.4 ± 0.2. Storage: 12 months…

Double-reticulating, high-strength matt metallic wax. TECHNICAL DATA:…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

QUARZOLITE TONACHINO PLUS

Highly protective, mould and mildew-resistant acrylic coating product with, for internal and external surfaces. Available in the following granulometries: 1.2 mm and 1.5 mm. TECHNICAL DATA:…

Highly protective, mould and mildew-resistant acrylic coating product with, for…

ULTRATOP LOFT W

One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect. TECHNICAL DATA: Consistency: fine powder.…

One-component trowellable fine-textured cementitious paste applied in layers up…