Project Shopping mall Retroville, Kyiv

Shopping mall Retroville

Kyiv, Ukraine

Ref #: 4

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Screed repair, surface preparation, indoor installation of ceramic tiles 300х600 and 1600х200 mm
Location	Kyiv, Ukraine
Subcategory	SHOPPING CENTER
Built in	2020
Opened in	2020
Application	Screed repair, surface preparation, indoor installation of ceramic tiles 300х600 and 1600х200 mm
Start and finish date	2019/2020
Application Type	Floor/wall coverings, New building, Surface preparation
Architects	Design Hub International
MAPEI Distributor	Мега-Лайн

Product used for the project

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When…

MAPEFOAM

Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…

Closed-cell, extruded foam polyethylene cord used as a support for elastomer…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PLANITOP 400

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer. TECHNICAL DATA: Maximum…

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

PROSFAS

Water-based, solvent-free consolidator with high penetration properties for cementitious substrates. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Drying time: according to the absorbency…

Water-based, solvent-free consolidator with high penetration properties for…