Project Thermal bath of Zalakaros,

Thermal bath of Zalakaros

Hungary

Ref #: 222020

Category: TOURISM AND WELLNESS


Yard	Waterproofing and installing cermic tiles and mosaic in the spa.
Location	Hungary
Subcategory	BATH
Application	System of waterproofing and installing ceramic tiles, mosaic.
Start and finish date	2018
Application Type	Floor/wall coverings, Waterproofing systems
Client	The council of Zalakaros
Contractor company	Szabadics Közmű és Mélyépítő Zrt.
Installer companies	Sándor Horváth
Architects	Archin Deko
MAPEI Distributor	Alu-Csat Bt.
Credits	Péter Szabó
MAPEI Coordination	Gergely Garay, Zsolt Marton

Product used for the project

KERAPOXY CQ

Two-component epoxy grout, easy to apply and excellent cleanability, with a bacteriostatic agent and BioBlock ® technology, ideal for grouting ceramic tiles and mosaics. Can also be used as an…

Two-component epoxy grout, easy to apply and excellent cleanability, with a…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVOPLAN

Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…

Smoothing mortar for internal and external walls and ceilings for thicknesses…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRALITE S2

One-component, high-performance, highly-deformable, lightweight cementitious adhesive with extended open time, very high yield, easy to trowel and good buttering capacity, for ceramic tiles and…

One-component, high-performance, highly-deformable, lightweight cementitious…