Project Vara Badhus, Vara

Vara Badhus

Vara, Sweden

Ref #: 1003

Category: SPORT FACILITIES


Yard	Bathrooms and swimming pools
Location	Vara, Sweden
Subcategory	SWIMMING POOL
Built in	2013
Opened in	2015
Application	Supply of products for water proofing, tile adhesives and grouts, concrete strengthening products.
Application Type	Floor/wall coverings, New building, Products for structural strengthening, Sealants application, Waterproofing systems
Client	Vara Kommun
Contractor company	Peab AB
Architects	ABAKO Arkitektkontor AB, Göteborg
MAPEI Distributor	Centro Byggkeramik
Credits	Marie Sjödin, MA Media
Project Manager	Håkan Svensson, Vara kommun
Other	The municipality of Vara has built a swimming pool / water park combined with a sport facility. The swimming pool is located at Vara Evenemangsgata, and is a neighbor to the Vara Opera house.

Product used for the project

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

KERACOLOR GG

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MONOFINISH

One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…

One-component, normal-setting cementitious mortar for smoothing concrete and…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRALITE S1

One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time, Low Dust technology and extremely high yield easy to apply by trowel, for ceramic…

One-component, high-performance, deformable, lightweight cementitious adhesive…