Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…
Two-component epoxy resin with a very low viscosity for injecting into…
Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…
Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…
Fibre-reinforced, controlled-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT HI-FLOW with 13-14 parts of water…
Fibre-reinforced, controlled-shrinkage mortar for repairing concrete. TECHNICAL…
Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…
Smoothing mortar for internal and external walls and ceilings for thicknesses…
Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…
Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…
Semi-flexible acrylic resin basecoat and filling paste in water dispersion with selected fillers for preparing multi-discipline sports and tennis courts
Semi-flexible acrylic resin basecoat and filling paste in water dispersion with…
지속적인 물과의 접촉에도 방수성능을 발휘하는 아크릴계 탄성 방수 페인트 용도 물과 직접 접촉하는 곳에 적합한 탄성 마감 코팅제로 하지면을 시공해야 하는 실내외 구조물을 도포하는 데 사용합니다. Mapelastic 또는 Mapelastic Smart로 방수 처리한 평지붕처럼 보행자가 많이 드나드는 곳에 사용하지 않는 수평식 콘크리트 표면을 빗물에 젖지…
지속적인 물과의 접촉에도 방수성능을 발휘하는 아크릴계 탄성 방수 페인트 용도 물과 직접 접촉하는 곳에 적합한 탄성 마감 코팅제로 하지면을…
Fibre-reinforced elastomeric, thick-layered finishing product with high filling properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…
Fibre-reinforced elastomeric, thick-layered finishing product with high filling…
Fibre-reinforced, elastomeric, high flexibility finishing product with good defect covering capacity, for internal and external applications. TECHNICAL DATA: Consistency: thick liquid. Colour: white…
Fibre-reinforced, elastomeric, high flexibility finishing product with good…
3액형, 셀프레벨링 에폭시-시멘트계 코팅제 1.5 ~ 3mm용 용도 Triblock TMB는 에폭시 또는 폴리우레탄 코팅을 시공할 수 있도록 임시적인 습기 차단층을 형성하여 양생되지 않거나 모세관 습기에 노출된 습한 하지면을 평평화 및 평활화하는 데 사용됩니다. 기술적 특징 ● 신속하고 간편하게 시공하여 평평하게 마감 처리할 수 있음 (내부용) ● 제빙…
3액형, 셀프레벨링 에폭시-시멘트계 코팅제 1.5 ~ 3mm용 용도 Triblock TMB는 에폭시 또는 폴리우레탄 코팅을 시공할 수 있도록…
Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…
Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…
Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…
Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…
Two-component, anti-acid epoxy paint modified with hydro-carbide resin for protecting concrete and steel surfaces. TECHNICAL DATA: Consistency: component A fluid paste, component B fluid paste.…
Two-component, anti-acid epoxy paint modified with hydro-carbide resin for…