혼합 후 30분부터 굳기시작하는 초속경 보수몰탈로서 박막시공이 가능 용도 ● 기둥, 슬라브, 벽체 등 건축 구조물의 보수·보강 ● 우레탄, 에폭시 시공시 하지면 보수 ● 각종 Con’c 구조물의 손상, 결함부위의 보수·보강 ● 각종 토목, 건축 구조 물의 유해 물질에 대한 보호 코팅 기술적 특징 ● 경화가 빠르며 초기 강도가 강하다. ● 모체와의 접착력이…
혼합 후 30분부터 굳기시작하는 초속경 보수몰탈로서 박막시공이 가능 용도 ● 기둥, 슬라브, 벽체 등 건축 구조물의 보수·보강 ● 우레탄,…
Primer G 프라이머 G 휘발성 유기 화합물(VOC)이 매우 낮은 합성수지 성분의 수용성 프라이머 용도 ● 세라믹 타일을 고정하기 전 석고 표면의 처리 작업에 사용 ● 석고 기반의 스프레이 플라스터용 고정 코팅제로 사용 ● 시멘트/석고/아스팔트/세라믹/대리석 표면과 평활용 몰탈의 접착력 증대시 ● 시멘트계 또는 석고 표면에 균일한 흡수성 제공 ●…
Primer G 프라이머 G 휘발성 유기 화합물(VOC)이 매우 낮은 합성수지 성분의 수용성 프라이머 용도 ● 세라믹 타일을 고정하기 전 석고…
Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…
Two-component, solvent-free epoxy primer used as bonding promoter for products…
Calibrated silica sand to improve the bond on resin or epoxy primers. TECHNICAL DATA: Colours: grey - beige. Grain size: 0.7-1.2. Packaging: 25 kg bags.
Calibrated silica sand to improve the bond on resin or epoxy primers. TECHNICAL…
Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…
Coloured acrylic undercoat with a smooth finish and good filling and adhesion…
Acrylic paint with micro-granular quartz with a smooth finish for long-lasting protection of internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…
Acrylic paint with micro-granular quartz with a smooth finish for long-lasting…
High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…
High-protection, thick-layered acrylic coating product with high filling…
Highly protective, mould and mildew-resistant acrylic coating product with, for internal and external surfaces. Available in the following granulometries: 1.2 mm and 1.5 mm. TECHNICAL DATA:…
Highly protective, mould and mildew-resistant acrylic coating product with, for…
One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…
One-component, ultra-fluid polyurethane resin applied by injection for…
Water-repellent, thick-layered acrylic-siloxane coating with high filling properties for internal and external surfaces. Available in the following granulometries: 1.2 mm. TECHNICAL DATA:…
Water-repellent, thick-layered acrylic-siloxane coating with high filling…