STABILCEM SCC

Cementitious binder for manufacturing dimensionally stable self-compacting concrete mixtures to repair concrete structures.
Stabilcem SCC is used to manufacture concretes with different aggregate sizes suitable for repairing, by casting, columns, bridge superstructures, and hydraulic works. Thanks to its properties, very fluid cement mixtures (slump flow: 65-70 cm) which do not segregate when placed by pump or by casting without vibration are obtained. By using Stabilcem SCC it is possible to reduce costs of repair work, shorten construction time, remove noise caused by vibration and improve the appearance of the structures. Preparing concrete mixtures with Dmax = 8 mm, mix Stabilcem SCC with graded aggregate between 0 to 8 mm or with Gravel 0-8 and Gravel 0-15. For manufacturing concrete with Dmax = 20 mm, mix Stabilcem SCC with aggregates with a maximum diameter not above 20 mm.
To improve open-air curing and further reduce shrinkage, Stabilcem SCC can be mixed with 5 to 8 l/m3 of Mapecure SRA, curing agent.

Consumption
concrete with Dmax = 8 mm: 600 kg/m3;
concrete with Dmax = 20 mm: 500-600 kg/m3.

Packaging
20 kg bags;
600 kg big bags.

Пов'язана документація

Технічна карта
Завантажити

Останні проекти STABILCEM SCC

Category icon ТРАНСПОРТНА ІНФРАСТРУКТУРА

2014/2015

Salt Water Bridge

Cape Town, Південно-Африканська Республіка

Відновлення бетону

Category icon ГРОМАДСЬКІ БУДІВЛІ/СПОРУДИ

Velasca Tower

Milano, Італія

Відновлення бетону

Category icon ПРОМИСЛОВІ ОБ'ЄКТИ

Sedit Factory

Modugno, Італія

Відновлення бетону

Category icon ГРОМАДСЬКІ БУДІВЛІ/СПОРУДИ

Ponte Felcino Cimney

Ponte Felcino, Італія

Відновлення бетону

Залишайтесь на зв'язку

Підпишіться на розсилку новин від Mapei