Project Contessina Suites & Spa,

Contessina Suites & Spa

Greece

Ref #: 2

Category: TOURISM AND WELLNESS

Construction


Yard	The Contessina Suits Hotel has 64 suites. The 32 of them which are located on ground floor have private small pools and the rest 32 on the first floor have internal Jacuzzi.
Location	Greece
Subcategory	HOTEL/INN
Built in	2018
Opened in	2018
Application	Mapei waterproofing systems were applied to waterproof the hotel pools. Ultratop Loft system was applied to the hotel lobby and service areas.
Start and finish date	2017/2018
Application Type	Cementitious & resin flooring systems, Waterproofing systems
Architects	Block 722 \| architects +
MAPEI Distributor	Moraitis Home
Credits	Nick Kontostavlakis

Product used for the project

KERAFLEX MAXI S1

High-performance, deformable cementitious adhesive, with extended open time and no vertical slip, with very low emission level of volatile organic compounds. Especially suitable for the installation…

High-performance, deformable cementitious adhesive, with extended open time and…

KERAPOXY CQ

Two-component epoxy grout, easy to apply and excellent cleanability, with a bacteriostatic agent and BioBlock® technology, ideal for grouting ceramic tiles and mosaics. For joints of at least 1 mm.…

Two-component epoxy grout, easy to apply and excellent cleanability, with a…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEFLOOR FINISH 58 W

Two-component, aliphatic, transparent or coloured, matt polyurethane finish in water dispersion. TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix:…

Two-component, aliphatic, transparent or coloured, matt polyurethane finish in…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging 2 mm), applied by trowel or with a roller, for the waterproofing of balconies, basins, swimming pools and wet areas.…

Two-component, high-flexibility cementitious mortar (with crack-bridging 2…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for up to 25% movements.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANISEAL 88

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approx. 1 h.…

Osmotic cementitious mortar suitable for contact with drinking water, for…

PRIMER FD

One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…

One-component primer for silicone sealants. TECHNICAL DATA: Application of…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

ULTRATOP LOFT F

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable coarse-textured cementitious paste applied in layers…

ULTRATOP LOFT W

One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable fine-textured cementitious paste applied in layers up…