High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has a very high white balance and excellent workability.…
High-performance cementitious adhesive with no vertical slip and extended open…
Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is used as a substitute for water to mix Keracolor FF and GG cementitious grouts, to improve the grout compactness,…
Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is…
KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm. Available in 20 colours . Mixed with the…
KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with…
KERAFLEX MAXI S1 ZERO is a high-performance, deformable, grey and ultra-white cementitious adhesive with no vertical slip , extended open time , and Low Dust technology, designed for ceramic and…
KERAFLEX MAXI S1 ZERO is a high-performance, deformable, grey and ultra-white…
Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand. TECHNICAL DATA: Application…
Surface treatment in liquid form made from lithium silicate with a…
Shrinkage-compensated fibre-reinforced mortar for concrete repair TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT THIXOTROPIC with 15.5-16.5 parts of…
Shrinkage-compensated fibre-reinforced mortar for concrete repair TECHNICAL…
Two-component, high-flexibility cementitious mortar (with crack-bridging 2 mm), applied by trowel or with a roller, for the waterproofing of balconies, basins, swimming pools and wet areas.…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
Pre-blended, ready-to-use dry shake hardener for concrete floors made of special well-graded quartz, Portland cement and special additives. TECHNICAL DATA Colour of mix: light grey Density of mix…
Pre-blended, ready-to-use dry shake hardener for concrete floors made of…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…
Solvent-free silicate based consolidating compound for cementitious substrates. Where to use: Consolidation of cementitious substrates with poor consistency even in depth, hardening cementitious…
Solvent-free silicate based consolidating compound for cementitious substrates.…
Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly on site. TECHNICAL DATA: A/B ratio (by volume):…
Two-component, solvent-free, pure polyurea membrane applied by spray with a…
Two-component, solvent-free, spray applied, hybrid polyurea membrane applied on site using a high-pressure, bi-mixer type pump to form waterproof coatings on roofs