MapePave range

MapePave offers durable, high-performance paving solutions designed for professionals and DIYers alike. Whether you're a tiler, landscaper, or homeowner, our easy-to-apply products ensure a seamless, weather-resistant finish for patios, pathways, and outdoor spaces. From brush-in grouts to specialist adhesives, MapePave delivers lasting results with minimal effort.

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.

MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.

MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.

Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

Brochures, manuals, guides

Brochures

MapePave Leaflet

Mapepave Brush in Grout Leaflet

Request a FREE sample

Sample

Request

Literature

Request

Please select your choices:

We would like to send you email communications containing important news and information regarding our events and product offers. Please tick here to unsubscribe from this activity

I have read and agree to Mapei's Privacy Policy

News & Events

Sustainable Mapei system joins spec at world-leading Eclipse Leisure Centre

Back

May 16, 2025

A Mapei tiling system has been used to complete a surface installation project at Spelthorne’s Eclipse Leisure Centre – one of the world’s most advanced energy-efficient leisure centres. The installation, carried out by Global Ceramic Tiling for Willmott Dixon, spanned the swimming pool, wellness areas and changing rooms. It features a variety of porcelain tiles, along with Mapei EMICODE: EC1 Plus certified sustainable formulations and products from Mapei Zero line, with CO₂ emissions fully offset in the entire life cycle*.

Designed by GT3 Architects and constructed by Willmott Dixon, the Eclipse Leisure Centre seeks to be one of the UK's largest wet and dry leisure centres to achieve Passivhaus, and the first in London. Facilities include a low-chemical 25m main pool, learner pool and splash pad, spa and sports facilities. The leisure club spans over 100,000 ft² and has a dementia-friendly design to meet whole community needs. Ultra-energy efficient and future-climate ready, it aims to consume up to 60% less energy compared with a standard new building.

The tile installation included swimming pool surrounds, wellness areas and wet and dry changing areas and featured 300 x 300 mm and 300 x 600 mm porcelain tiles, supplied by Spec Tile. During the installation, surfaces were prepared by Advance Screeding. Mapei Topcem - a special fast drying hydraulic screed binder – was applied to form a complex set of falls within the changing rooms and to level common areas to a super flat SR1 surface regularity. Mapelastic AquaDefense ready-to-use rapid-drying liquid membrane was applied to waterproof damp areas throughout the complex.

All tiles were installed with Mapei Keraquick S1 quick-setting, deformable adhesive and fixed with Ultracolor Plus anti-efflorescence, quick-setting and drying polymer-modified grout, which feature water-repellent DropEffect^® and mould-resistant BioBlock^® technology. Both products have since become part of Mapei’s Zero Line. Mapei Topcem, along with Keraquick S1 and Ultracolor Plus, also benefit from EMICODE: EC1 Plus formulations.

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up - https://www.mapei.com/gb/en/newsletter