MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

EDC Render Plaster UK completes three-storey renovation with Mapei

May 20, 2025

EDC Render Plaster UK has completed a domestic renovation using a Mapei render solution.  The project, in Sheffield, was completed with Mapei primer mortar, mesh, and protective siloxane top coat, Silancolor Tonachino.  All Mapei materials were supplied by ProTec Render Supplies.

The renovation of the three-storey semi-detached property in Crosspool included all external walls and commenced with removal of existing render back to original brickwork. Eco Prim Grip Plus bonding promoter primer – a low odour and very low VOC EMICODE: EC1 Plus certified formulation - was then applied to promote adhesion on the bare brick surface.  The primer was followed by two Mapei smoothing mortars - Nivoplan and Mapetherm AR1 GG large-grained cementitious mortar – used to smooth and level the facade and alkali-resistant glass fibre mesh, Mapetherm Net, was applied to reinforce the skim coats.  

During the final stage of the renovation, Silancolor Tonachino - is a thick-layered siloxane coating – was applied as a top coat. Transpirant and water-repellent, Silancolor Tonachino has high filling properties and creates a textured finish which protects all types of cement and lime-based renders.

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter

Products mentioned in the article

SILANCOLOR TONACHINO
SILANCOLOR TONACHINO
TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the ColorMap ® automatic colouring system. Density (EN ISO…
ECO PRIM GRIP PLUS
ECO PRIM GRIP PLUS
Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low emission of volatile organic compounds (VOC) for render,…
NIVOPLAN
NIVOPLAN
TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20…
MAPETHERM AR1 GG
MAPETHERM AR1 GG
ETA 10/0024 ETA 10/0025 TECHNICAL DATA: Consistency: powder. Colour: grey and white Density of the mix (kg/m³): 1,400. Application…
MAPETHERM NET
MAPETHERM NET
TECHNICAL DATA: Composition: 100% glass fibre. Colour: white. Mesh size (mm): 4.15 x 3.8. Weight of primed mesh (g/m²): approx. 150.…

Keep in touch

Subscribe to our newsletter to get Mapei news