MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Mapei tiling system just the ticket at Edgware Road underground station

July 14, 2025

A fast-track Mapei wall tiling system and UltraCare cleaning and maintenance products have been used to complete a surface refurbishment at Edgware Road underground station. The project, carried out by JNG and DMC, featured tiles from Johnson Tiles’ Prismatics range installed throughout the ticket hall and station’s walkways. Mapei products promoted a fast, safe application, with the render, adhesive and sealant featuring EMICODE: EC1 Plus-certified formulations, with very low VOC. Mapei’s UltraCare HD Cleaner and Ultracolor Plus are also included within Mapei’s Zero line, with CO2 fully offset in the entire life cycle.

Works undertaken by JNG and DMC form part of a series of upgrades taking place on the Edgware branch of the Northern Line in Central London. During the project preparation stage, JNG and DMC removed all existing wall tiles and adhesive residue, back to the solid substrate. The team then skimmed walls with Mapei Planitop Fast 330 quick-setting, fibre-reinforced cementitious levelling mortar, to even out irregularities and ready surfaces for tiling within a four-hour timeframe. Existing walls were then cleaned with UltraCare HD Cleaner Zero to remove all traces of organic dirt. The application followed extensive trials at Kentish Town underground station, during an earlier Mapei project, and training of contractors on-site.

Mapei Keraquick S1 quick-setting, deformable adhesive was then used to install the Prismatics Ceramic tiles, which were grout-ready after two hours. The installation was finished with Ultracolor Plus grout in a contrasting grey shade and Mapesil AC silicone sealant. Mapei Ultracolor Plus is a quick-setting and drying anti-efflorescence cementitious grout and Mapesil AC is a highly elastic colour-matched pure acetic silicone sealant. Both products benefit from mould-resistant BioBlock® technology and Ultracolor Plus also features water-repellent DropEffect®.

The tile specification included Johnson Tiles’ Prismatics White Gloss 200x100mm, Prismatics Victorian Green Gloss 200x100mm and Prismatics Black Gloss 200x100mm.

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter

Related videos

Products mentioned in the article

Keep in touch

Subscribe to our newsletter to get Mapei news