MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Mapei helps transform fully accessible pool at Maison Des Landes Hotel

October 13, 2025

A Mapei waterproofing and tiling system has been used to complete a pool installation at Jersey’s Maison Des Landes Hotel. An accessible hotel and community hub, Maison Des Landes is designed specifically for people with disabilities and their carers. The installation was completed by Jersey-based Ian Guiney - ‘The Mosaic Man’ - for the charitable trust and features porcelain mosaics throughout the pool tank. All materials were supplied by Romerils of Jersey.

Totally refurbished in 2023, the Maison des Landes combines the relaxing atmosphere of a modern hotel with the latest facilities. The new indoor swimming pool replaces a 25-year-old marbelite-finished pool; it has been designed with a ramp and pool access chair for ease of access and exit.

During the tank renovation, Mapeproof Swell hydro-expansive paste and Mapemortar HB R3 Zero concrete repair mortar were used to seal around light fixtures, penetrations and to repair concrete. Products from the Mapefix range of epoxy resin anchor adhesives were used to fix balustrade and ladder bolts. Walls and floors were prepared with Topcem fast-track screed binder and Planitop Fast 330 fibre-reinforced levelling mortar.

Mapelastic Zero cementitious waterproofing membrane was applied to the tank and reinforced with alkali-resistant glass fibre mesh, Mapenet 150, and alkali-resistant rubber tape, Mapeband. The 50 x 50 mm mosaic tiles were then installed with Adesilex P10 white mosaic adhesive, mixed with Isolastic elasticising latex additive.

The installation was completed with Mapei Keracolor SF cementitious grout, with the addition of Isolastic elasticising latex additive. Joints were primed with Mapei Primer FD bonding enhancer and sealed with Mapesil AC pure acetic silicone sealant.

Keracolor SF, Mapesil AC and Topcem are EMICODE: ECI Plus-certified and have very low VOC formulations for a safe installation environment. Mapelastic Zero and Mapemortar HB R3 Zero also have CO2 fully offset in the entire life cycle.*

“Good people find good people and Ian Guiney’s talent is extraordinary — he’s like a modern-day Picasso! The pool is breathtaking; he achieved exactly the two-tone effect and wow-factor we were hoping for, using his preferred Mapei system. Our pool is now enjoyed not only by our disabled holidaymakers and countless guests with mobility and accessibility needs, but also by many in the local community — from our youngest pool user, at just six weeks old, right through to people in their 90s,” commented Steve Martin, General Manager, Maison Des Landes Hotel.


If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter

Related videos

Products mentioned in the article

Keep in touch

Subscribe to our newsletter to get Mapei news