MAPEFLEX MS 55 bonds and seals the most widely-used building materials in both dry and damp conditions. High initial tack , rapid final hardening , elastic and paintable , MAPEFLEX MS 55 is available…
MAPEFLEX MS 55 bonds and seals the most widely-used building materials in both…
Some application examples: Render coating in Mapetherm system Decorative finishing coating for mineral substrates, such as: ▫ concrete; traditional renders (cement, cement-lime or gypsum-based…
Some application examples: Render coating in Mapetherm system Decorative…
Pre-blended, ready-to-use industrial hardener for concrete floors made from special quartz in a granulometric curve, Portland cement and special additives.
Pre-blended, ready-to-use industrial hardener for concrete floors made from…
Acetic cross-linking mould resistant silicone sealant for general purpose use around sanitary ware and within ceramic tiled finishes. Flexible sealant for use in kitchens, bathrooms and shower rooms.…
Acetic cross-linking mould resistant silicone sealant for general purpose use…
Preliminary impregnator for polyurethane sealants and adhesives, on all substrates.
Preliminary impregnator for silicone and hybrid sealants and adhesives on non-absorbent substrates.
Preliminary impregnator for polyurethane sealants and adhesives, on all…
MAPECOAT TNS PRIMER EPW is a solvent-free , two-component epoxy primer in water dispersion according to a formula developed in the Mapei R&D laboratories, for surfaces to be coated with acrylic or…
MAPECOAT TNS PRIMER EPW is a solvent-free , two-component epoxy primer in water…
MAPESHIELD I are multilayer pure zinc anodes coupled with a special conductive paste for galvanic cathodic protection of reinforcement rods against corrosion in new structures or structures…
MAPESHIELD I are multilayer pure zinc anodes coupled with a special conductive…
Where to use: Mapelastic 2KR Plus can be used as a waterproofer under tile and slab coverings, according to PG AIV. Mapelastic 2KR Plus can be used as a crack-bridging protective coating for concrete…
Where to use: Mapelastic 2KR Plus can be used as a waterproofer under tile and…
With PP level GRID safety system, installing ceramic tiles and/or stone slabs of different formats and in different directions will no longer be a problem. In fact, this tool for the installation of…
With PP level GRID safety system, installing ceramic tiles and/or stone slabs…
Where to use: Thanks to its unique formulation, concrete which is produced using Dynamon EW 460 will have extended
consistence retention performance when producing high quality concrete from…
Where to use: Thanks to its unique formulation, concrete which is produced…
Where to use: MapeWall GPR Zero is suitable for rendering and levelling internal and external masonry substrates, in
thicknesses up to 15 mm per layer, up to an overall maximum thickness of 40 mm.…
Where to use: MapeWall GPR Zero is suitable for rendering and levelling…
Where to use: Repairing damaged concrete surfaces in overhead, vertical and horizontal situations, where a medium
strength high build mortar is required. Application examples: ▪ Repair of damaged…
Where to use: Repairing damaged concrete surfaces in overhead, vertical and…
Where to use: Bonding to cement-based and suitably prepared calcium sulphate based screeds, concrete, existing
unglazed ceramic floor tiles, cement-based renders, gypsum plaster, plasterboard,…
Where to use: Bonding to cement-based and suitably prepared calcium sulphate…
Where to use: Recommended for grouting voids in structural elements such as: filling gaps in precast elements, a
grouting base plates and bridge bearings.
Some application examples ▪ Anchoring of…
Where to use: Recommended for grouting voids in structural elements such as:…