MAPEFILL GP

Instructions for use •
Preparation: substrates must be sound, clean, free of dust, grease, debris and laitance and sufficiently rough. Surfaces must have previously been pre-soaked, however, excess water shall be removed before application of the grout.

Mixing: Pour 80% of the required mixing water into a suitable rust free container and slowly add a 25 kg bag of MAPEFILL GP. Add the remaining water to achieve the desired mortar consistency (water ratios are 4 litres for ‘pumpable’ consistency; 4.5 for ‘pourable’ consistency). Mix for 1-2 minutes with a low speed mechanical mixer, then check that the mixture is well blended by removing any powder left on the sides of the mixer. Re-mix for another 2-3 minutes. Larger quantities can be mixed in a grout mixer.

The mix obtained remains workable for about 1 hour at +20°C. Application: Pour the MAPEFILL GP mix from one side only into the prepared cavity or shutter in a continual flow in order to prevent the entrapment of air bubbles.

Consumption: 13.5 litres per 25 kg bag.
Storage: 12 months in original packaging in a dry place.
Manufactured in compliance with the regulations of the 2003/53/EC Directive.
For further information consult the technical and the Safety data sheet. PRODUCT FOR PROFESSIONAL USE. PROTECT FROM HUMIDITY

Related documentation

Technical data sheet
Download
Safety Data Sheet
Download

Last Projects MAPEFILL GP

MAPEFILL GP is part of the lines:

Keep in touch

Subscribe to our newsletter to get Mapei news