Back

PLANITOP HDM MAXI

Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced mortar for structural “reinforced” strengthening work, when used in combination with mesh from the MAPEGRID line, and for smoothing and levelling concrete and masonry.

Where to use:

Planitop HDM Maxi is used in combination with Mapegrid G 120 and Mapegrid G 220 primed alkali-resistant A.R. glass fibre mesh or Mapegrid B 250 primed alkali-resistant basalt fibre mesh to structurally “reinforce” stone, brick, tuff and mixed masonry structures.

The system complies with the approach defined by the guidelines for the approval of FRCM (Fibre Reinforced Cementitious Matrix) systems.

Planitop HDM Maxi may also be used on its own to restore the texture of masonry or to level and even out the surface of reinforced concrete and masonry. Moreover, Planitop HDM Maxi is part of Mapetherm Tile System, for installing tiles and slabs on external wall insulation systems for façades.

Packaging: 31.25 kg kit: component A: 25 kg bags; component B: 6.25 kg canisters

TECHNICAL DATA:
Maximum dimension of aggregate: 1 mm.
Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B.
Pot life of mix: approximately 1 hour (at +20°C).
Maximum applicable thickness: 25 mm.
Classification: EN 1504-3 - class R2 non-structural mortar.
Storage: 12 months (comp. A); 24 months (comp. B).
Application: gauging trowel, trowel or rendering machine.
Consumption: approximately 1.85 kg/m² per mm of thickness.
Packaging:
31.25 kg kits:
– 25 kg vacuum-packed polyethylene bags (comp. A);
– 6.25 kg drums (comp. B).