Back

SILANCOLOR CLEANER PLUS

Hygienising detergent in watery solution.

Where to use:

Silancolor Cleaner Plus is a water-based product used to treat deteriorated surface by algae and mould before painting with Silancolor Plus protection system.
Silancolor Cleaner Plus forms the basis of the Silancolor Plus protection system for façades, and has a deep-down cleansing action which removes algae and mould from surfaces damaged by such microorganisms.

Some application examples:

Deep cleaning of façades damaged by algae and mould before painting.

Recommendations:

Do not use Silancolor Cleaner Plus on metal surfaces.
Do not apply Silancolor Cleaner Plus if the temperature is lower than +5°C or higher than +35°C.
Do not apply Silancolor Cleaner Plus on wet surfaces.
Do not apply Silancolor Cleaner Plus if it is about to rain (protect from driving rain for at least 8 hours).
Please refer to the “Safety instructions for preparation and application” section.

Packaging: Silancolor Cleaner Plus is supplied in 1 and 5 kg plastic drums.

TECHNICAL DATA:
Consistency: fluid liquid.
Colour: transparent.
Density (EN ISO 2811-1) (g/cm³): approx. 1.01.
Dilution rate: diluted up to 300% of water.
Waiting time before applying other products: 24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 24 months.
Application: low-pressure manual spray gun or brush.
Consumption: 0.2-1 kg/m² (ready-to-use solution).
Packaging: 1 and 5 kg.