Back

SILANCOLOR TONACHINO PLUS

Highly protective transpirant, water-repellent, mildew and mould-resistant siloxane coating product for internal and external surfaces.

Where to use:

Silicon resin-based coating product in paste form with good filling capacity for a rustic finish on internal and external surfaces, available in various grain sizes, recommended for finishing off internal and external walls where particular environmental conditions favour the growth of algae, mould and fungi, and to give an attractive finish, excellent water-repellence and good transpiration to the substrate.

Some application examples:

Decorating façades deteriorated by algae and mould, including façades with old paintwork (check suitability beforehand).
Decorating north-facing façades.
Decorating all types of cementitious and lime-based render.
Decorating Mape-Antique and PoroMap-based renders and dehumidifying renders in general.
Finishing coatings for cladding systems such as Mapetherm.

Packaging: Silancolor Tonachino Plus is available in 20 kg plastic drums.

TECHNICAL DATA:
Consistency: paste.
Colour: white or various colours using the ColorMap^® automatic colouring system.
Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.90 (according to the grain size).
Dry solids content (EN ISO 3251) (%): approx. 80.
Dilution rate: supplied ready to use (it can be diluted with 1-2% of water).
Recoat time: 12-24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 12-24 months.
Application: trowel.
Consumption:
– 0.7 mm: 1.7-2.0 kg/m²; – 1.2 mm: 1.9-2.3 kg/m².
– 1.5 mm: 2.2-2.6 kg/m².
Packaging: 20 kg.