ULTRACOAT RENEW FL

The quick, simple solution for refurbishing parquet.

ULTRACOAT RENEW FL

The quick, simple solution for refurbishing parquet.

NO SANDING REQUIRED

PRESERVES THE ORIGINAL APPEARANCE OF PARQUET

NO DUST CREATED, SHORTER WORK TIMES

QUICK AND SIMPLE

The Ultracoat Line is a complete Mapei four-step system for refurbishing and hygienising parquet floors.

ULTRACOAT RENEW FL primer for wood flooring is the best choice for refurbishment work; no sanding required and no need to remove the old finish, it also avoids creating dust and shortens the time required to complete work.

It is used when applying two-component varnish on existing parquet treated with UV-resistant or oil-based finish (except oily wax finishes), or with solvent-based or water-based varnish.

Along with Ultracoat Remover Plus detergent for removing old wax and dirt, Ultracoat Cleaner hygienising detergent and Ultracoat HT 2K two-component, water-based, aliphatic, 100% polyurethane lacquer, tested according to ISO 22196, it gives a new lease of life to the surface of wood flooring and preserves the natural beauty of parquet floors. Apart from restoring the surface of floors, ULTRACOAT HT 2K forms a barrier against the proliferation of bacteria.

ULTRACOAT RENEW FL

Two-component, adhesion promoter primer for two-component, water-based Ultracoat lacquers.

ADVANTAGES:

Quick, simple application
No sanding required
Practical: no dust created, shorter waiting times and lower overall cost of the work
Maintains the original appearance of parquet
Used in combination with ULTRACOAT HT 2K protects against bacteria and hygienises surfaces
Avoids having to sand, make bevelled edges and brush surfaces
Preserves the original characteristics of parquet
Complete system

TECHNICAL DATA:

Density: 101 g/l
Mixing ratio (A : B): 2.7 : 0.49
Viscosity of mix: 40 ± 1 sec. (Ford cup Ø 3)
Set to the touch: 60/80 min.
Overlaying: min.1 hour max. 6 hours