Back

ULTRALITE S2 QUICK

One-component, high-performance, highly-deformable, lightweight, rapid-setting and hydrating cementitious adhesive with extended open time, good trowelability, high wetting capacity and extremely high yield, for ceramic tiles and stone, ideal for installing thin porcelain tiles.

Where to use:

Bonding all types and sizes of ceramic tiles (double-fired, single-fired, porcelain tile, klinker, terracotta, etc.) to internal and external substrates.
Bonding natural stone to internal and external substrates.
Bonding all types and sizes of thin porcelain tiles to floors and walls, including external façades.
Bonding all types of mosaic to internal and external substrates even in swimming-pools.
Bonding standard ceramic and porcelain tiles directly over cable undertile heating systems.

Especially suited for use in large floor areas and for the installation of large format tiles without the need to back butter. Because of its high wetting capacity to the backs of tiles, it is particularly suitable for laying any type of thin porcelain tile (using the double buttering technique).

Packaging: Ultralite S2 Quick is supplied in 15 kg paper bags with handles

TECHNICAL DATA:
Pot life of mix: 50 minutes.
Open time: ≥ 30 minutes.
Grouting of joints:
– on walls: after 2-3 hours.
– on floors: after 2-3 hours.
Set to light foot traffic: 2-3 hours.
Ready for use: 24 hours.
Colours: grey and white.
Application: N° 4, 5, 6 or 10 notched trowel.
Deformability according to EN 12004: S2 - highly deformable.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Consumption: 1.5-2.5 kg/m².
Packaging: 15 kg bags.